FE-FC Holden Discussion Forum
November 26, 2024, 06:11:08 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > General Technical (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > Fuel Issue
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: Fuel Issue  (Read 3820 times)
ACT59FC
act-club
Full Member
***
Offline Offline

Model: FC
Posts: 130



View Profile WWW
« on: November 25, 2017, 12:12:27 AM »
0
Fitted a non vacum fuel pump today and it works well but Ive developed a problem, At idle the engine stalls and petrol runs out of the shaft area of the carby. Ive checked the needle and seat, all good. Checked the float level, all good. Anyone got any ideas?Huh

Regards Rod.
Logged
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: November 25, 2017, 10:15:54 AM »
0
Has the carby been rebuilt?  It sounds like it has a fuel leak somewhere.

Ken
Logged
ACT59FC
act-club
Full Member
***
Offline Offline

Model: FC
Posts: 130



View Profile WWW
« Reply #2 on: November 25, 2017, 06:43:56 PM »
0
No the same carby thats been on it since I got it. Could then new pump be higher pressure? Just seems like too much fuel. Ill recheck the float level. Failing that Ill try another carby. Seems too much of a coincidence its only happened since I put a different fuel pump on.

Regards

Rod
Logged
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #3 on: November 25, 2017, 07:47:47 PM »
0
Yes I agree, it does sound like too much of a coincidence, maybe fuel delivery pressure is too much for the original grey carb
Logged
ACT59FC
act-club
Full Member
***
Offline Offline

Model: FC
Posts: 130



View Profile WWW
« Reply #4 on: November 26, 2017, 09:52:16 PM »
0
Adjusted the float level quite savagely and that appears to have done the trick.

Thanks everyone for the input.

Rod.
Logged
FC the Marilyn Monroe of Holdens. All the curves in exactly the right places!
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.036 seconds with 20 queries.