FE-FC Holden Discussion Forum
November 23, 2024, 06:12:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: The FE-FC Holden Car Club of NSW are proud to host the 19th FE-FC Holden Nationals. Check out the announcement video for more.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Temp Gauge  (Read 3192 times)
Airfireman
Junior Member
**
Offline Offline

Model: something else...
Posts: 72


View Profile
« on: March 20, 2016, 08:45:32 PM »
0

Gday all,

My FC has the oil pressure and amp gauge in the dash but not a temp gauge only the light.

At what te,p does the light come on and is it too late by then??

Have other members fitted a temp gauge, if so where did you install and which type??

Thanks

Tim
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: March 20, 2016, 09:54:30 PM »
0

In original condition the radiator cap is 4 pound per square inch and the consequential boiling point of the engine is 217 F. This is when the switch is calibrated to go on.
As is common, the cap is changed for a 7 pound one and this raises the boiling temp to 226 F.
If the temp switch is not updated to the later switch, then the temp light will come on at 217 and the engine will not be at boiling point.
So, long answer to a short question - it is usually not too late if you stop the car immediately. The consequences of running with the temp light on are usually a cracked head.
However, if you have the condition described above, then the car is not overheating at all.
That said, if the light does come on it is an indication that the cooling system needs checking
This is a pretty common problem.

Ken
Logged
Stewy
sa-club
Senior Member
****
Offline Offline

Model: FE
Posts: 881


FErgus 1957 FE Special Station Sedan


Jeff Stewart
View Profile
« Reply #2 on: March 20, 2016, 10:07:13 PM »
0

I think this is a 173 Red motor.

Stewy   Cool
Logged

No matter how much you push the envelope, It'll still be stationery
Airfireman
Junior Member
**
Offline Offline

Model: something else...
Posts: 72


View Profile
« Reply #3 on: March 20, 2016, 11:02:33 PM »
0

Stewy is right its a 173 Red Motor

Different sensor reading???

I like the idea of fitting a gauge to check running temp

Thanks Ken

Tim


Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.04 seconds with 20 queries.