FE-FC Holden Discussion Forum
November 23, 2024, 09:12:05 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Different booster to standard  (Read 3601 times)
NES304
Guru
*****
Offline Offline

Model: FC
Posts: 2874


Yes Dear


nes304
View Profile
« on: July 13, 2012, 09:39:37 PM »
0

So my build has taken a turn (new build thread to come) and want to consider the impact if any of running VS commodore calipers all round with a VT booster.

What should I be considering if anything? Is the VT booster suitable or too strong?

Cheers
Logged

mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: July 14, 2012, 01:13:58 PM »
0

The VT booster will react too quickly for VS calipers - VT booster has a 2 stage action directly suited to VT calipers. Use a VS booster.

Ken
Logged
NES304
Guru
*****
Offline Offline

Model: FC
Posts: 2874


Yes Dear


nes304
View Profile
« Reply #2 on: July 14, 2012, 01:20:33 PM »
0

Dammit
Logged

FC327
Newbie
*
Offline Offline

Posts: 6


View Profile
« Reply #3 on: July 15, 2012, 08:36:25 PM »
0

Hi My everyday car has been using the combo you mentioned. I have a vl and I am running the VT booster and master cylinder with VS/VL turbo front calipers on 290ml discs and std vl/vs rear disks. The car brakes very well and the additional boost from the vt booster is noticable.  The brakes are predictable and are not touchy, you can lock them if you want to. The VL is a little heavier than the FC. FC327
Logged
NES304
Guru
*****
Offline Offline

Model: FC
Posts: 2874


Yes Dear


nes304
View Profile
« Reply #4 on: July 16, 2012, 12:00:06 PM »
0

I just installed VT pedals and booster when mcl1959 made comment. I trust his judgement re braking experience but interested in you actually running them. Save me from re doing my firewall!

Does the pedal travel less before lockup?

I really have to start a thread I think
Logged

FC427
nsw-club
Guru
*****
Offline Offline

Model: FC
Posts: 2457


I love YaBB 1G - SP1!


View Profile
« Reply #5 on: July 16, 2012, 01:39:44 PM »
0

I just installed VT pedals and booster when mcl1959 made comment. I trust his judgement re braking experience but interested in you actually running them. Save me from re doing my firewall!

Does the pedal travel less before lockup?

I really have to start a thread I think
Do a search under "Show us your Booster" I started this thread a while back has some good shots of the alternative unites you can use .....FC427.....
Logged

As I lay rubber down the street I pray for traction I can keep, but if I spin and begin to slide please dear god protect my ride
NES304
Guru
*****
Offline Offline

Model: FC
Posts: 2874


Yes Dear


nes304
View Profile
« Reply #6 on: July 16, 2012, 04:16:08 PM »
0

427 thanks, had a look but i am not looking for an alternative as I have ALREADY installed the VT setup. I just want it to work properly and need to nut out if it will do the job now before I get to the end of the conversion and realise I should have used the VS unit. As I cut bloody holes everywhere I am going to have to cut a dirty big square in the fire wall if I am to use the VS setup as the bolts are different and I dont want swiss cheese firewall!!

I hope I get to use the VT booster...


« Last Edit: July 16, 2012, 04:25:44 PM by NES232 » Logged

Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.035 seconds with 20 queries.