Nasco accessory switches

[John253a]

Unable to find what this switch was used for, and wondering what it may have been for,
Going through some of other peoples pic and have seen a few fe/fc with this switch, so must of been common at one stage or another

It is a 2 position pull switch similar to headlights but is located next to ignition switch between drivers door on that flat
Thanks

[zulu]

Could have been for driving / fog lights, accessory cooling fan perhaps

Gay

[John253a]

Sorry made mistake it's a 3 position switch
Off is all in, then pull first on then pull again second on

Haven't used a meter to check if there is a voltage difference from outputs for a fan or such, as havent had a chance to wire up or pull out to check

[fcwrangler]

By the sound of it , the switch could be for the heater fan control, I have a similar switch in a pile of old stuff that I bought from a guy a few years ago it is mounted on a plate with a red warning light.
Jim

[John253a]

i pulled it out today and it has a wire winding on the back of it and only 2 terminals on it

[collecta]

  Hey gary, thats an unusual way of signing off  your missing a letter

     Scott

[zulu]

haha