FE-FC Holden Discussion Forum
October 06, 2024, 11:01:35 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
FE-FC Holden Discussion Forum > Technical Board > Modification Help (Moderators: RET, Glenn 'Stinky' Stankevicius, gp) > hr front end with uc brakes
Pages: [1]   Go Down
« previous next »
  Add bookmark  |  Print  
Author Topic: hr front end with uc brakes  (Read 2319 times)
ehholdenman
Junior Member
**
Offline Offline

Model: FC
Posts: 31


Bradley bolt
View Profile
« on: July 09, 2011, 08:34:23 PM »
0
Hello all
Wanting to known if a uc torana caliper and hubs would fit on a hr stub axle and if so can i still run hr steering arms
Thanks for your help in advance
Logged
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #1 on: July 10, 2011, 05:24:39 PM »
0
That is exactly how I built my FE. You need to carve a bit out of the upper wishbone for clearance on full lock, or weld in some longer bump stops which will reduce the turning circle.

Ken
Logged
Pages: [1]   Go Up
  Add bookmark  |  Print  
« previous next »

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.034 seconds with 20 queries.