FE-FC Holden Discussion Forum
July 05, 2024, 02:26:01 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Air compressor problems  (Read 2821 times)
Hewart
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 698


Holden on forever...


profile.php?id=1071847991 hewart
View Profile
« on: January 01, 2008, 08:17:29 PM »
0

G'day.....

Just having a little problem with my air compressor..... Yesterday I tried to blow up some tyres and could barely muster enough pressure. Usually it would run until there was enough pressure and then switch off until the pressure drops, then run again etc, but it doesn't seen to be building up enough pressure to do anything....

Is there anything I should be looking at, or alternatively, anywhere I could take it to get it looked at (nothing is coming up in the yellow pages)?

Cheers
Les...
Logged

Spinner
nsw-club
Senior Member
****
Offline Offline

Posts: 639


Whitewalls - more than 'just' a way of life.


View Profile
« Reply #1 on: January 01, 2008, 08:59:32 PM »
0

Les,

A couple of basic checks that you might have already done.

Is the drain cock closed?
Is the air tap open?


Cheers

Brett
Logged

(0414) 49-6706.  d5461 on Ebay.
colt
act-club
Senior Member
****
Offline Offline

Posts: 869


I love YaBB 1G - SP1!


View Profile
« Reply #2 on: January 02, 2008, 02:31:16 PM »
0

Les, check the air filter on the compressor inlet.
Can you tell if the motor is running at its nornal speed? Belt or direct driven?
Colin.
Logged

colt
Fat_Charlie
Newbie
*
Offline Offline

Posts: 17


I love YaBB 1G - SP1!


View Profile
« Reply #3 on: January 02, 2008, 05:33:12 PM »
0

MY compressor blew the head gasket once which would'nt let it build up enough air to turn the pressure swich off,could be worth a look,very easy to fix
The pressure switch could be playing up too
Logged
Hewart
nsw-club
Senior Member
****
Offline Offline

Model: FC
Posts: 698


Holden on forever...


profile.php?id=1071847991 hewart
View Profile
« Reply #4 on: January 03, 2008, 04:05:39 PM »
0

Thanks guys!!

Brett and Col, as far as I could work out everything was running normal (as normal as when I've used it before anyway).... I only noticed something was up because I had turned it on to "warm up" while I was doing something else, and it never stopped and never built up any pressure......

As for belt or direct driven, I'm not sure Roll Eyes
it looks similar to this if that helps!



Thanks Charlie, I'll have a look!

Cheers
Les...
Logged

colt
act-club
Senior Member
****
Offline Offline

Posts: 869


I love YaBB 1G - SP1!


View Profile
« Reply #5 on: January 03, 2008, 05:50:37 PM »
0

Les, my comp is similar to yours but larger. I would say warm up deactivates the valves somehow while it warms everything up, so the comp doesn't start on load cold.
It is direct drive, no V-belt.
Colin.
Logged

colt
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.049 seconds with 20 queries.