FE-FC Holden Discussion Forum
November 30, 2024, 08:42:37 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
   Home   Help Search Calendar Login Register  
Pages: [1]   Go Down
  Add bookmark  |  Print  
Author Topic: Tilli kit on ute  (Read 3299 times)
TTV6FC
Guru
*****
Offline Offline

Model: FC
Posts: 1132



View Profile
« on: October 19, 2007, 11:15:28 PM »
0

Hi Guys,there are some ute doors for sale on ebay at the moment that look for all the world to have had a tilli kit fitted to them.Pardon my ignorance but did utes have Tilli kits too or has the seller made a blunder Ebay Item #140168279115?Cheers,Jamie.
Logged

Run your fingers over my Holden and I'll run my Holden over your fingers!!!!
Glenn 'Stinky' Stankevicius
Moderator
Guru
*****
Offline Offline

Model: FE and FC
Posts: 5135


Willaston, South Australia


Glenn.Stankevicius
View Profile
« Reply #1 on: October 20, 2007, 02:58:53 PM »
0

You can't really tell if they are in fact ute doors, but if people managed to fit utes with FC Sedan special door stainless then anything is possible.
Logged

mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #2 on: October 20, 2007, 08:49:52 PM »
0

They sure did - here's one



Here's another



Regards  Ken
Logged
TTV6FC
Guru
*****
Offline Offline

Model: FC
Posts: 1132



View Profile
« Reply #3 on: October 20, 2007, 09:48:18 PM »
0

Thats fantastic Ken,I have never seen that before.Looks like there were plenty of extras on that second ute! Shocked Cheers,Jamie.
Logged

Run your fingers over my Holden and I'll run my Holden over your fingers!!!!
mcl1959
vic-club
Guru
*****
Offline Offline

Posts: 6155


FE's rule


View Profile
« Reply #4 on: October 21, 2007, 03:47:12 PM »
0

Yes a bit of a mixture of parts
The "Holden" script has been moved forward and 3 FB stars added where the script used to be. And another "Holden" script on the rear quarter.
It also has scratch plates and an FB bonnet emblem as well as the big wing mirrors.
Would have been a flash ute in its day

Ken
Logged
TAYZ
Guest
« Reply #5 on: October 22, 2007, 08:58:05 AM »
0

How old is the pic of the second ute Ken?  Is it still salvageable?  Im not after one but just wondering.  Looks like a real kool old ute. Cool
Logged
Brad
Senior Member
****
Offline Offline

Model: FC
Posts: 308


My FC Van in 1986 and I still have It


View Profile
« Reply #6 on: October 22, 2007, 06:02:14 PM »
0

About six months ago I went up to Mt Tarampa QLD to look at a ute for sale and it had an almost identical Tilly flash as the one in the second pic. I have never seen one before like it and thought it was a one off home made add on .  I should have taken my camera with me but I asked my niece who lives nearby to take a pic and e-mail it to me , still waiting Roll Eyes.BTW the colours were the same to look at.
     Unfortunately the floor and subframes were rusted away and it was a basket case . The owner wanted $1000 for it. about $600 to much for me considering the state of it.
                 Brad.
Logged

Id rather have a full bottle in front of me than a full frontal labotomy
Pages: [1]   Go Up
  Add bookmark  |  Print  

Share this topic...
In a forum (BBCode) 
In a site/blog (HTML)

 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.049 seconds with 21 queries.