Gday Nes
Yes we have had plenty of  response- most people need time to  organise finance ( ie  negotiate with the household minister of finance!)

At present we are  just waiting  to see who  gets back to us with the most reasonable offer... don't be afraid to  pop out again and sneak another look

Don't forget the streetneat FC part clearance sale still continues!

Cheers streetneat-Andrew...

Hah! youre nott he first to offer that!... No I have visions of  zipping around NZ in a pair of my custom  creations  so Its coming with me.
But Kims FC  has to be sold  as  we cannot afford to take 'em all...
Cheers streetneat-Andrew.

Good god November heh? I had better get crackin' on my HG ute, My EK ckhopped van , My '48 502 powered Maple leaf truck , my...

My  wife is commnig - better go..
Cheers streetneat -Andrew..  

[November]

Hi nes138,

The rego falls due again on the 23rd of June 2006, and IF we still own the car then WE will be putting this on club rego as the car isn't getting a lot of use.

That's what happens when you have TOO many cars.

We ARE hoping to leave Australia sometime in November , or at the VERY latest early 2007. We need to payout the Crewman loan b4 WE can leave and the sale of KUM66 is what will do that.

Also the plates KUM66 are also up for sale !

Cheers,
Kim........ aka Mrs Streetneat  

 Mrs streetneats Terracotta over Adobe beige  FC sedan is for sale - reduced slightly down from 30 K (this is its insured value with Shannons)  as we are moving over seas ( NZ)  full build pics  can be seen  via  www.streetneat.com under Mrs streetneats album.
This car was fully  restored by  ourselves  in late  2004 and  has clocked  under 5000 miles so is still like new.
Its has HR  front and rear ends - lowered , stainless fuel tank , MP3 player, 186S and Trimatic with 2:78 LSD  rear end.

Any interested parties can contact us on (07) 3206 0340. or 0412 032 239. Inspection by appointment only.
Cheers Andrew and Kim - Streetneat.

 Some of you may remember my previous clearance sale - many thanks to those who responded.  Now its  truly on in earnest - My original estimate of  "I've got 4-5 years to be rid of this stuff' hads now been bought forward drastically - I now need to be rid of this gear inside the next 6 months or sooner.
we are moving  to NZ and  closing down streetneat (although the workshop and painter shall remain)

So I have many  parts and panels and lots of Grey motor  bits to sell  as well as a few HR  front ends - (straight from HR's one  good - one not  so good), red motors- mainly 186's - also a couple of 186 's set ups , heaps of FB- EK bits , A very good FE sedan rear cut - suit couch.
I have two very good Passenger side doors ( front and back) for a FC sedan  and many more  spare doors  and guards  that need repairs or can be used for parts.

basically  its all gotta go as I cannot take it with me  so if there is anything  your chasing  or  just want some back up spares then give me a call on (07) 3206 0340 or 0412 032 239

Kim's FC sedan ( see Mrs streetneats album via http://www.streetneat.com ) is also  still for sale and will be reduced a bit  in price down from  30 k for a quicker sale - however she tells me she wont be giving it away and will leave it  here  with family until sold.
Thanks
Andrew- streetneat.

 I have the plates  from my FC Ute I have sold interstate  for sale- NFC 580  These are black and white plates  and we are looking for  offers around the $500 mark. All the FC related plates have long since been snapped up - so dont miss out on this  rare opportunity to  personalise your FC!

Interested parties can contact  me on (07) 3206 0340  or 0412 032 239.

Cheers streetneat -Andrew

So now Brad will have the quandry of having to find some panels to fill the window sides in on this one as well! heheheh...
Cheers streetneat-Andrew...

 You haven't seen my Camira!- which is probably a good  thing... A  close encounter with the car trailer claimed a guard and drivers door - but no beer was spilt... The recent addition of an L300 bull bar  sees the 'mira now as a serious  contender for recalcitrant  trees and parked wrecks...
Yes the mighty 'Mira  may have to stay- but open to offers of more beer...

Gday Rob- Its funny that you see the EK Delivery I'm building as a bakers Van - I keep looking at it and thinking it looks like a bread box

You musta missed the part of my original post that says - 'don't ask about the others!'... (Prolly what I posted on oldholden.com) But I may relent on the Camira

You had better get married a few more times to come close to the money  it would take to get me to part with the EK.
Cheers streetneat -Andrew

Your right though the Camira farm car  doesent quite cut the Mustard.
- But I still have My HG Ute  to finish - so I wont be too lonley.

I dont have one here (accessible anyhow)- but if you try Bruce a 742 Logan rd at Greenslopes - he can sell you one. His number is 3397 9211
Cheers streetneat-Andrew.

The response has been astounding to say the least- I wont miss the telephone thats just packed it in- New one coming shortly...
I will be taking a deposit shortlly on the Ute- that one didnt  even last  an hour- so I thought I would just  let others here know.

I expect the Sedan to follow suit - as thats the one everyones been hassling us for...
Sad days here at Streetneat...

 I am seeking expressions of interest for two of my FC's. The wife's FC sedan and my FC Ute. These cars can be viewed via my website on the last page of Mrs streetneats Album.
THE FC CUSTOM IS NOT FOR SALE- SO DONT ASK!

The time has come to downsize my collection. I am in no  hurry to do this. I am seeking expressions of interest over 30k for the FC sedan and expressions of interest over 25k for the FC Ute.
The FC sedan has a little over 3000 miles since its full Monty restoration and the FC Ute  has only travelled 13000 miles since its full restoration.
Both these cars are powered by  fully detailed 186s motors. The Utes engine features  35/75 cam stage 5 yella terra head and is backed by a Celica 5 speed & 3:08 LSD
The  FC sedan has a mild 186s engine backed by a column shifted  trimatic and 2:78 LSD
No expense has been spared  on the restoration of these vehicles. I never built them to sell.  The full build up pics can be seen via  my website
http://www.streetneat.com
I am seeking genuine enquiries only. No tyre kickers PLEASE!
The cars values I have described are the  genuine amounts they are insured for.  Inspection  by appointment only.
If you have any questions I may be contacted on (07) 3206 0340 or 0412 032 239
Cheers streetneat Andrew.

I have a few EK front ends- so as they have the same outrigger as an EJ EH I will see what I can cut out for you. I will have to closely look at whats left in the pile of front ends...
Cheers Streetneat- Andrew- hope you saw your  genourous  tip ( over payment) returned!

I have not a chance to cut the our rigger out  just yet- I spoke to my mate with the front ends this morning - he will have a look and see what he has later this week. ( I wont hold me breath though - I have to keep onto him to get  things from him.)
I will hopefully hear from you tommorow.
Cheers streetneat-Andrew

Sorry for the slow response- the notification of replies must have been turned off- or the missus  got to it b4 me!
I can arrange a swap  of one of my front ends for one with the eh outrigger and engine mounts- but as I also have to shell out for this  and rely on my mate to deliver its a bit of a procedure...but can be done.
Leave it with me and I will see what I can do- please ring me to remind me on 3206 0340.

Yeah I'm winding the  shop up- or down   whichever applies... Ive had enough of charity resto work. Plus the fact the developers are moving in makes it an easier decision... It may take a while to be rid of all my parts though. I will continue to help out others where I can with advise and  small jobs and parts location.
Cheers streetneat-Andrew.

Gday Dean
I actually have a spare full set of new glass I had made for the wife's FC sedan. I want $650 for it.(my  cost)  It includes  four door windup windows and the four 1/4 windows front and back. All the glass has been CNC cut and has polished edges- that  virtually doubles the cost of the glass- so beware of cheaper hand cut and hand harrassed (linished edges) windows!

Second hand glass is a waste of time.  Although I have plenty!I even went to the trouble of getting new stuff made made by Pilkington with the water mark standards stamp on it- (required by law) AND its toughened glass with a slight green tint  so it matches the factory  rear glass which has more green tint than the factory side glass and matches perfectly with  new windscreens.

An example of this glass can be seen  on my website-  www.streetneat.com -as fitted to  Mrs streetneats FC sedan. I went to this expense as we  want  glass that was superior to the factory glass and would not  tear up the new bailey channels.
Its details like this that we put into our cars that enable us  to insure them  for  a lot more than  average. Also its these details that  give you the feeling of driving a brand new old car- glass is very important in my book  and it shouldn't be overlooked ( pardon the pun)

Apologies for the rant reply to your simple request- I'll send you a pm anyway - and seeing as you asked first  you get  first preference- but I thought I would make others here aware of what I had to clear out - I m not building any more FC's so I dont need the spares.

Cheers Andrew- streetneat. (07) 3206 0340

Gday Brad
I have the cuts  you need in perfect order already cut out and sitting  inside the back of my FCvan- problem is you will have to buy the whole van to get them.  I am in Brisbane too! You could sell the van off to recoup your costs - so its worth considering.
Cheers streetneat -Andrew. (07) 3206 0340

Hey stinky
Sort of a tall ask  you got there!- I have some bumperettes to suit re chrome. If you need some- give me a call on (07) 3206 0340/ 0412 032 239.
Cheers Andrew- streetneat