FE-FC Holden Discussion Forum
March 29, 2024, 11:01:57 PM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News: Are you a member of one of the FE-FC Holden Car Clubs of Australia ? If you are, get access to the Club-Member-only area of this discussion board. Send an IM to the board admin, including your real name and club to get access.
 
  Home Help Search Calendar Login Register  
  Show Posts
Pages: [1] 2 3 ... 8
1  For Sale and Wanted / Parts Wanted / Panels Wanted on: May 01, 2020, 09:15:00 AM
Hi,

I'm in need of parts to use for repairs on my sedan.

Happy to pay good money for very good parts or trade for other parts if you need something specific

I'm in Tassie but freight should not be a problem.

Wishlist
1.Complete Subframe
2.front guards
3.bonnet
4. Boot
5. NOS or very good  LHS rear quarter section

Let me know if you can help.

Cheers

Ben



2  Technical Board / Modification Help / Re: HR drop stubb suppliers?? on: June 27, 2014, 06:04:17 PM
Josh - you do have some reasonable flares too remember...
3  Technical Board / General Technical / Re: Where to buy seat belts. on: April 25, 2014, 10:06:43 AM
Seatbelt solutions in WA made mine, they can do any style or length and a range of colours.  They sent me sample material for colours and the service was very fast.
4  Galleries / Members' Completed FE-FC Projects / Re: FC, L plates and Nitrous Oxide = F . U . N!! on: March 05, 2014, 12:01:34 AM
no prob, i'm a big fan of the salt flats, i'd show you a pic of mine but no more till after the nats....hahaha
5  Galleries / Members' Completed FE-FC Projects / Re: FC, L plates and Nitrous Oxide = F . U . N!! on: March 03, 2014, 08:46:43 PM
you will be fine with drums, especially if transport has given you the go ahead.  I have a r31 skyline rear disc setup kicking around somewhere that i was going to adapt to the centura in my daily.  From memory i was only looking at 10mm or so a side increase in track. your welcome to have a play with it if you want to see if it will make enough difference...what wheels did you end up ordering?
6  For Sale and Wanted / Parts Wanted / Urgently needed gearbox crossmember handbrake setup on: February 26, 2014, 09:01:06 PM
Hi All,

Anyone local got a gearbox cross member with the hand brake setup kicking about?  I thought i had one but cant find it, need to pilfer the handbrake lever setup to adapt to my new cross member....

Cheers


Ben
7  Galleries / Project Cars - FEs and FCs Under Construction / Re: A sneak Peak............ on: February 25, 2014, 08:24:49 PM
yep - doors are around 6 inches longer, didn't want to mess with the shape too much.   if anything i'd like to widen the car.....but wow what an undertaking that would be!!

8  Galleries / Project Cars - FEs and FCs Under Construction / Re: A sneak Peak............ on: February 19, 2014, 09:18:49 PM
Well a few changes of plans here and there, a new engineer, engine and drive line direction and a mad race to get this finished for the nats....this is all you are getting for now - See you all in Hobart this April!!
9  Technical Board / Modification Help / Re: What's Biggest rubber under the rear end on: January 24, 2014, 08:03:38 PM
My daily FC sedan  has 245 50 14's tucked under the rear end on 14x8 steelies.  No rubbing, inner guards 'stretched' with a big hammer, outer guards have had a small pump, it is what i would consider very low for stock spring setup. Tyres are tucked under guards.
10  For Sale and Wanted / Parts Wanted / Re: FC interior parts needed on: January 09, 2014, 12:58:50 PM
id have some sun visors for you, im in hobart, pm me if you like
11  For Sale and Wanted / Cars For Sale / Re: FC windowless panel van for sale on: January 05, 2014, 03:04:36 PM
can you send me the pics mobiusbar@yahoo.com.au thanks
12  For Sale and Wanted / Parts Wanted / sheetmetal glovebox insert on: December 24, 2013, 10:37:48 AM
Hi,

I might be dreaming, but i'm sure someone was producing these a while back? anyone have one sitting about or any leads?

cheers

2door350
13  Technical Board / Modification Help / Re: Demister for rego on: December 08, 2013, 09:26:53 PM
Thanks for the input, if i don' t use an electric heater that i can remove i want to be able to hide it under the dash. That's why i was looking at the first option, may have just found an even smaller one, will post link if it works out.
14  Technical Board / Modification Help / Re: Demister for rego on: December 08, 2013, 02:58:44 PM
Not cheap but also a nice looking unit

http://www.minimania.com/part/24A1898-N/Aftermarket-Custom-Heater-For-All-Year-Minis#ship
15  Technical Board / Modification Help / Demister for rego on: December 08, 2013, 02:25:20 PM
Thoughts on this for rego? i think 1/4 vent windows are for demisting by the way, i wonder if it will pass?

http://www.melwideautoradiators.com.au/radiator-products-for-sale/12-volt-radiant-heat-demister/
16  Galleries / Members' Completed FE-FC Projects / Re: FC, L plates and Nitrous Oxide = F . U . N!! on: August 22, 2013, 07:14:43 PM
and, if your buying new wheels you can achieve whatever track you want (clearance permitting) if the offset is chosen wisely.
17  Galleries / Members' Completed FE-FC Projects / Re: FC, L plates and Nitrous Oxide = F . U . N!! on: August 22, 2013, 07:13:15 PM
vsb pretty clear on track, my experience is that you wont get away with narrower than std fc track which is 1384mm. 

4.2.9 Passenger Car Wheel Track
The wheel track of passenger cars (or derivatives) must not be increased by more than 25mm
beyond the maximum specified by the vehicle manufacturer for the particular model. This
means that the rim offset must not be changed by more than 12.5mm.
Reduction in wheel track must not be performed without approval of the relevant Registration
Authority.

But in saying that there is a grey area surrounding alternate diff track.

Track. Where non-original axle or suspension cross-member components are fitted,
the offset of the wheel in relation to the axle or hub assembly used must not be
increased by more than 12.5mm each side of the vehicle based on the specifications of
the axle components used. If an axle assembly is shortened then the track width limit
is taken as the axle manufacturers original track dimension, less the amount the
assembly has been narrowed, plus 25mm.

i'll leave it to you to interpret this.

18  General / General Board / Re: rego woes on: January 22, 2013, 10:24:20 AM
202 crank machined down to fit in a 186 block is your best way around it if you want the extra cubes
19  For Sale and Wanted / Parts For Sale / Re: FC parts clean out on: December 05, 2012, 01:09:43 PM
5 speed SOLD(pending payment)
firewall linkage SOLD
oil cooler setup SOLD
radiator SOLD
Starters SOLD
CSA 5 slots SOLD
20  For Sale and Wanted / Parts For Sale / Re: FC parts clean out on: October 21, 2012, 06:05:24 PM
CSA 5 Slots SOLD
Pages: [1] 2 3 ... 8
Powered by MySQL Powered by PHP Powered by SMF 1.1.21 | SMF © 2015, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.045 seconds with 17 queries.