Maybe be a sticky needle and seat, looks like the needle is letting too much fuel into the bowl and is coming out of the breather. Try taking the needle and seat out and cleaning it first. Depending what type of float you have in there also if its plastic or metal float, could have a hole in it and filled up with fuel and no longer floats. After cleaning it try adjusting the needle and seat.
Sexyfc

Hey mate, really great job you have done there. The HR Dash looks trick in there..
john

Done some work on my dash

I have booked an engineer for the 18th of march to come and have a look at some of the work and ask him how to mount seat belts and seats and what ever else needs done. I'll let you's know what the story was.
jonno

You got some great photos there..

Very tidy unit, like the colour

Na, that should be just the spring. What engine is this on?

Thanks guys, i couldnt touch the rails unless i was going to get it engineered. I managed to fit a 245. Still a bit of room but i went smaller to play it safe untill car is drivable.

4 years ago the car was at a panel beater for an attempt to fix the body and paint it. The beater said that the car had a bent rear right rail so he straightened that. But the quarter had been repaired previously by somebody else with the bent rail and was welded on wrong. So he cut the old quarter ready for another piece. With the quarter of he shut shop and left it like that. But i am tackling this properly now.
sexyfc

Just back from the sandblasters and 2pk etch primed

the 480hp donk, once car goes to get sprayed i will paint all the bits and pieces while she's gone

Tubs out of car

Tubs sitting in the car

Tubs finished
Hope this worked

Hi everybody, if any body has a set of extractors to suit FC with small block chev please let me know, if it makes any diff i have a th350 behind it.
thanks all
john

sorry mate...   Cant help you with those mounts. If you can send them back and give you your money back?
john

Craigieburn 3064 Vic
cheers

Hi all
After a full set of scuff plates, i thinks thats what you call them. plates that sit on the sill panel inside.
cheers

hi mate, Did you get those visor mount plates? I have a boot lid which is very tidy. Want $60.

In need of a 9 inch out of early f*%d with 28 spline and drum brake. No center needed.

Im going to ballarat swap meet today, i'll see whats happening there about the sump situation..

Thanks guys i'll look into the mini wiper system

sorry guys, i was talking about the wiper motor, 

I notice some here has there engine bay as an avatar and i was wondering how they hide the washer motor??
thanks
john