0437 840 733

Give me a call thanks or your number .

Hi Jim,

Not sure on paint , I like the orig green and cream , may keep it like that .

Hey
Thanks John  ( Stash)
Hope to have the motor in and driving up and down the driveway before Xmas....unless work calls me away again.

Hi All , With Stash,s help , some pictures of my long term project will be posted soon .

Gaz
( Splitty)

Thanks everybody for your  info 
Ed
FC 427
Slack
Pete


Cheers

Gaz

FC 427,

Hi thanks for your help , my engine / tranny set up is facing 6 *down , do yu mean i set the diff at 4 * down as well. I think Im gonna have too google some more info   lol

HI John,

References are the rear seal housing on the transmission is 6* down angle as governed by the Hadfield set up. Do I set the diff pinion flange to show what angle . Down or up ?

Thanks

Gaz

Hi Guys

I need some info on setting pinion angle on my diff. Have got 6 Degrees on rear of  turbo 350 transmission , do I set the diff pinion at 6 degrees opposite.

Gaz

Hello all, just found out there is an inexpensive cable kit for column auto conversions.
Being a generic item- it has multiple settings and adjustments to accommodate.
The person to contact is Geoff at Curleys ph: (03) 517 417 29
Please tell him Jason from WA made the recommendation.
I don't want him thinking the interrogating phone calls have all been in vain  hahahaha
Regards
my59

Curleys Rods and Customs...check his website

Hi guys,

Can anyone give me some info on rear axles . Have got the 17x 7 showwheels in Hq pattern ready for the B/W diff . Can axles studs need  be changed re- drilled etc ..??

Gaz

 Hey Ken,
thanks again i will study a bit more ? run original springs with the shortened BW 78 first see how it goes and keep the hr ones and modify later if needed.

Hi Ken ,
My query was a bit broad , was refering to rear springs .allready got the CRS front end in place

Gaz

Anybody fitted eh/hr springs into the fc, i realise the width difference, any way of resizing springs??

Hi Nick ,
dont know anything about the motor , came with a panel van i bought some 8 years ago , been in glad wrap on my bench for that long with the occassional wind over by hand .
the rest of the stuff is off my Fc wagon that is now under going the sbc 350 transplant so no longer reqd. I can email some pics to your private inbox as soon as i can . not home at the momoent for another couple weeks .

Gaz

Hi everybody
Starting a shed clean out
Rear qtr replacement panel
rebulit grey motor Not run in
rebuilt front end mechanicals whheel too wheel and rear diff
red and black interior trimm seats front and back
too much to mention


PM me
In Latrobe valley Victoria

Hey Wayne  yu still in the Isa  ?

Gaz

thanks Wayne

Hi all ,
Has anybody got some ideas on setting up spring saddles for my VN commo diff into fc project. Am getting lots of differing themes and war stories etc . is it just re- use hr saddles welded to vn axle and combine with rubber mounts for the srings. any pictures would be great .

Gaz

Thanks guys , I had a trip to Melb today and visited the Showwheels store, really like the 17 x 7 streeters . As you guys hav mentioned i will measure up now , armed with some info gained from Show wheels. I have been reading all the threads related to rear ends and may still yet go with the old commie. VN i think is the one . Like everyone else new to the forum , i will post some pics when i work out how , Hav at least got a photobucket account as of last nite lol
Gaz
(Splitty)