Messages

ok i have 2 tpyes of spears
ones that say holden and others that dont
as for the tail gate badge i think your out of luck as most of the parts i have are for the sedan and my ute didnt have 1 but if you have a picture of 1 i can look at my parts photos and see if i do
hope this helps
adam

i  think i still have both ill cheak tomorrow

the drivers side ute door and both drivers and passenger front guards are sold

guys the hr front end diff and trans hump is sold now

due to reasons that i cant control i have to sell all my fe parts  and cars
I'm going to make a complete inventory later today but this is what i know now
vn v8 LSD disc brake diff ( not shortend )
LX / UC torana rack and pinion steering rack
crs bigger trans hump
hr disc brake  front end ( complete but pulled apart )
set of doors  and front guards
lights , bumpers, glass, chrome trims , dash clusters , handles , old gray motor and trans , plus of course my Ute and sedan
there are lot and lot of parts if there is something you want in particular just ask and maybe email me a photo of it
all these parts are in Canberra
I'm not looking to make a fortune on these parts just recover some costs
you can call me on 0401779793
thanks Adam

hey i just wanted to congratulate you on your build so far
its like watching a episode of overhaul your moving so fast
cant wait to see move pics
keep up the good work

adam

or holden should do a charity thing where everyone sends in the rust on there car and when they get a set weight they donate a wheel chair to a kid or something like they do for the can ring pull things

thanks for your replies guys
allthough it is really rusty and it was a pain to remove anything (only to find more bloody rust) i got about a half a cubic metre of cootamundra dirt FOR FREE and thats a bargin as for for the rest i have some how landed on cheap parts all the way along this build so far has only cost me around  2 grand and thats for motor gearbox 2 cars towing and steel and with the success of the others on this site in there builds it keeps me motivated so thanks to all the people that write here

yeah sure my number is 0401779793 just drop me a line and we will go from there

oh and the other inner sill is in now so its starting to come back together

hey guys i havent updated in a while (sux working 7 days) so i got some more pic's .The ute is finally up on the rotisserie and im finding so much rust, both inner sills, both a pillars, both b pillars, crossmember, all the floor, parcel shelf behind seat, and big sections of the rear chassis   so lots of rust but ill get though it 1 patch at a time
i put in the new passenger inner sill yesterday and doing some more work today
and now the pic's

email of parts sent

hey mad i have most of that stuff and im in canberra so not to far to travel
as far as price im not to sure  but it wont be much as it is all spare
pm me your number and ill call you 
adam

hi red devil
from memory there is 3 shifter ext available
1: that sits back
2: that sits in the middle
3: that sits forward
i think you have the middle 1
there is a company that does this sort of thing called dellow might want to try them

adam

hey im just about to do the same thing this week so i will take heaps of photos if you like although i have the whole floor to replace so maybe a little different


adam

just a pity its not road registered

hi guys
i cut the rust out of the passengers b pillar the other day and made the new peice
it came out good i just have to make the outer panel now and clean up  the welds
i just started making the rotisserie aswell and should have the ute up on it soon

my seat supports are rusted off at the sills on both sides as to is the cross member that the gear box bolts to all the top floor in the rear is gone and the bottom floor around the fuel tank is clovered in moss and i haven't looked into it yet i also have rust in the bottom of my passenger b pillar as far as the panels go i only have rust around the rear wheel arches

arrrr i gather you own the light blue 1
ek---ek plates  i took a photo as you were driving towards me very very cool
does someone on here own the green fb wagon

are you sure that the repo floor pans  go from the rear tray to half up the fire wall  because thats the sort of rust im having to cut out

id just like to say sorry to joe as it was me that stopped his son and made him park it due to wrong coloured arm bands
i counted a total of 5 fe/fc there including both of those sweet chopped Ute's    gives me something to aspirer to