Messages

computer same memcal in computer different,easy to change
brad

hope theses help jason if they upload


and the last two are for inspiration
sorry couldn't help my self
thanks brad

ahh purple udl (vodka & passionfruit) real ladies drink
thanks jas

I am after a headlamp switch as mine has shit the tin.Pref in Victoria
Thanks Brad

standard 15" rims are 6" "interceptor" rims are 7".ute rims have ute stamped near the wheel nuts as someone else said,then there are the vp &vq irs rims that run a different offset to standard interceptors which are the ones that have 26p near the valve,so if u have clearance issues u may try to get the 26p interceptor rim and try that on,hope that helps Brad

VQ-VP IRS rims are different offset also check the stamp near the valve think it is 26p as opposed to standard rim which is 43p

Vn &Vl discs and calipers are the same the backing plates are the same  except one of them has the handbrake mech at the bottom of the backing plate and the other is at the top cant remember,the backing plates bolt up the same
Brad

You would be able to make your own extractors to hug the block as a small block Chev is narrower than the holden v8 engine,
of course what rack & front end you are using will determine how they need to be routed

Come on Jason theres nothing wrong with commwreck (when i was there)
But u are right about corio auto parts ;D

No not interested in buying it just stating it looks like a manual :-\

Turbo 400? looks like a manual :-\

Someone on this forum has twice been around to my house to see me, last time was Saturday but i was in bed with the flu,my apologies but make yourself know by sending me a p.m
thanks brad

I am looking for a grille badge if anybody has one plesae p.m me
thanks Brad

Just as well Jason as u have put the wheel on backwards  :'(

ONE OF THE MAIN REASONS I FELL IN LOVE WITH THESE CARS FROM THE 80"S,REMEMBER SEEING THIS CAR IN THE EXHIBITION BUILDINGS WITH THE PLATES FC 427 AND THE BLOWER HANGING OUT THE BONNET,BEFORE I BOUGHT MY UTE BACK RECENTLY I LOOKED AT THIS CAR TO BUY,THE OWNER IS NOW GOING TO SUPPLY RWC. WHAT A CAR IN ITS DAY WOW.VERY 80"S CONVERSION THESE DAYS THOUGH
http://ninemsn.carpoint.com.au/used-car/HOLDEN/FC/Victoria/csn6523953.aspx

http://cgi.ebay.com.au/HOLDEN-FE-UTE-1957-CHOPPED-TUBBED-CHEV-CUSTOM-SHOWCAR_W0QQitemZ270338313787QQihZ017QQcategoryZ101895QQssPageNameZWDVWQQrdZ1QQcmdZViewItem

http://cgi.ebay.com.au/NOS-HOLDEN-FORD-XY-XM-FE-FB-EK-EH-EJ-FC-HR-NASCO-TRIMS_W0QQitemZ150315311856QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item150315311856&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

http://cgi.ebay.com.au/Holden-Ute-Van-Tail-Gate-for-FE-FC-FB-EK-Tailgate_W0QQitemZ370123566280QQcmdZViewItemQQptZAU_Car_Parts_Accessories?hash=item370123566280&_trksid=p3286.c0.m14&_trkparms=66%3A2%7C65%3A1%7C39%3A1%7C240%3A1318

Hard lid is made out of 1 inch box tubing the upholsterd all over, the hinges are colt sed boot hinges just bolted to the ute inner quarter covers real easy.

No sorry that was 7 years ago