FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: Laszlo on June 11, 2021, 07:08:14 AM



Title: Fe scuff plates
Post by: Laszlo on June 11, 2021, 07:08:14 AM
G'day guys  !

Just a short question  :   The Fc scuff plate  is exactly the same as Fe one ?
Rare spares selling them under Fc fitting.  In the shop no one knew the answer.
I presume they are same, but you never know...

Thanks : Laszlo


Title: Re: Fe scuff plates
Post by: mcl1959 on June 11, 2021, 08:28:27 AM
Different, FE scuffplates have a flat profile, whilst FC have a raised section running the length of the plate. Supposed to be to repel water from entering the car.
Ken


Title: Re: Fe scuff plates
Post by: Laszlo on June 11, 2021, 10:59:14 AM
Thanks Ken !

My next question  :   Can I still  use the Fc one in my Fe ?
Will fit  ?

Laszlo


Title: Re: Fe scuff plates
Post by: Laszlo on June 11, 2021, 02:05:36 PM
I did find an old thread about the stainless steel scuff plates.  So I  know now the Fc will fitt perfectly to Fe.
Anybody knows if Sam still  making the plates after 10 + years  ?
I did try the number 0358221379,  still working  with the answering machine.
So wait and see.

Cheers: Laszlo (https://uploads.tapatalk-cdn.com/20210611/eb84809e12871f64b738df662ff1c33e.jpg)

Sent from my SM-G965F using Tapatalk


Title: Re: Fe scuff plates
Post by: mcl1959 on June 11, 2021, 03:15:33 PM
I believe he still is making them.  And you  are correct, the FC ones will fit in FE

Ken


Title: Re: Fe scuff plates
Post by: Laszlo on June 11, 2021, 09:04:07 PM
Yes, his still making them and a few other things too. After I left a message on his home phone he rang me back. 0358221379 still his number.
I'm ordering a set of scuff plates a petrol trim cap and a pair of wiper arm air foil.
Good price too. The set of Fc scuff plates  from  Rare spares is over $400 from him the stainless steel one is  $300 with postage to Brisbane.

Cheers : Laszlo
 


Title: Re: Fe scuff plates
Post by: Laszlo on June 11, 2021, 09:06:25 PM
Good stuff  !(https://uploads.tapatalk-cdn.com/20210611/dd9eead4f5b0da2cd178a6511289bb3b.jpg)(https://uploads.tapatalk-cdn.com/20210611/6fd7b803e3f8eb420cdc57dade62ba5d.jpg)

Sent from my SM-G965F using Tapatalk


Title: Re: Fe scuff plates
Post by: camxsmith on June 12, 2021, 11:33:04 PM
Wow thats so cool I was just thinking about them I will have to give him a call thanks for the post  :D


Title: Re: Fe scuff plates
Post by: Laszlo on June 13, 2021, 09:10:30 AM
You are welcome mate !

Just a side note : the Fc and Fe plates a slightly different,  what Ken was saying the profile flat Fe vs  raised Fc. The end bit on the front one slightly different too. On the rear one for the Fc only has 3 holes vs 4 on the Fe. Not a big deal anyway.

Laszlo


Title: Re: Fe scuff plates
Post by: Harv on June 13, 2021, 05:01:10 PM
I've got Sam's stainless scuff plates on my EK wagon. Gentleman to deal with, and an awesome product.

Cheers,
Harv


Title: Re: Fe scuff plates
Post by: fcute on June 17, 2021, 08:37:40 PM
I bought a set of FC scuff plates from Sam, great product and a great gentleman to deal with.

Cheers Dave


Title: Re: Fe scuff plates
Post by: Laszlo on June 17, 2021, 09:12:03 PM
Right now mine is between Victoria and Queensland in transit  : )

Cheers  : Laszlo