FE-FC Holden Discussion Forum

For Sale and Wanted => Other Stuff Wanted => Topic started by: Captainwaldopepper on December 05, 2020, 06:35:02 PM



Title: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 05, 2020, 06:35:02 PM
Just started the restoration of my FC ute.
Has anyone around Adelaide got one they don't use anymore?


Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: JB on December 06, 2020, 02:50:12 PM
I built one out of 2 engine stands... a lot cheaper than a purchased one... worked a treat!


Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Errol62 on December 07, 2020, 05:21:13 PM
Did the same. Two heavy duty engine stands, extended height and fixed together with two lengths 2” pipe welded to bases after the body was mounted.


Sent from my iPad using Tapatalk


Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 11, 2020, 09:13:30 AM
Thanks guys-I've seen a few made up using two engine mounts.
I'll knock one of these up. :)
Cheers
Dave


Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: JB on December 11, 2020, 11:17:03 AM
Just a heads up, the centre of gravity on a ute is at the level of the tray. I worked this out the hard way lol.

Cheers
JB
(https://i.postimg.cc/9whg35SM/BBBB078-A-4527-4-B0-D-A087-00989-C4-DC198-1-105-c.jpg) ($2)


Title: Re: Rotiserie for FC ute wanted-Adelaide SA
Post by: Captainwaldopepper on December 11, 2020, 04:35:41 PM
Thanks JB-handy to know before I start!!