|
Title: Demister Vents Again! Post by: ekute on June 22, 2014, 07:41:24 PM Can anybody explain the differences between FC/FE vents and FB/EK ones?
I have two sets one of which I have already installed in my FE (they aren't coming out because the screen is in) but I think one set was supposed to be the later ones. The set I put in my FE don't fit very well and the opening on the vent is smaller than the opening on the dash. I can't remember whether I compared both sets of vents! Title: Re: Demister Vents Again! Post by: FE_UTE on June 22, 2014, 10:25:11 PM G'day ekute
Heres a couple of pics of both FB/EK on left FE/FC on right Hope this helps Cheers Gary (http://s12.postimg.org/ccyqzboh5/FE_FC_002.jpg) ($2) (http://s12.postimg.org/szgb8ehex/FE_FC_003.jpg) ($2) Title: Re: Demister Vents Again! Post by: FCRB26 on June 23, 2014, 05:34:39 AM Both my cars have original fc vents and they look like eds repros nothing like the ones in the pic ?
Title: Re: Demister Vents Again! Post by: FE_UTE on June 23, 2014, 10:24:30 AM I don't know if these are original equipment
I took the smaller ones out of an FC with a Warmaride heater The larger ones were in an EK Panelvan with a heater Title: Re: Demister Vents Again! Post by: Ed on June 23, 2014, 03:47:48 PM they look to be FB/EK or something else.
the FE FC vents look like this… metal are original. fibreglass are reproduction. (http://img.photobucket.com/albums/v128/Ed74mnd/FE%20Holden/17362_218732007431_2125589_n_zpscd396168.jpg) Title: Re: Demister Vents Again! Post by: ekute on June 23, 2014, 10:42:05 PM Ok thanks guys, mine are both the same as the fb/ek ones Gary posted.
I bought one set when I still had the EK ute and the others came with my FE but weren't installed. Title: Re: Demister Vents Again! Post by: FireKraka on June 24, 2014, 03:11:09 PM Hi Ekute;
I am after a set for my ek ute project if you want to sell a set. Regards Neil H Title: Re: Demister Vents Again! Post by: westy on March 17, 2019, 01:06:17 PM Where can I get a set for my FE Sedan?
Title: Re: Demister Vents Again! Post by: Harv on March 18, 2019, 07:18:06 AM FE/FC ones are "squat", similar to the fibreglass ones that Ed repros. The FB/EK ones are much thinner in the bit that touches the dash.
You can use Ed's FE/FC repros in an FB/EK. They need a little bit of trimming, but otherwise work. I have a set in my EK wagon (with thanks Ed). Cheers, Harv |