|
Title: rear fin extensions Post by: NES304 on June 26, 2006, 10:07:52 AM Any one have any rear fin chrome extensions found on models with only a small insert colour?
Title: Re: rear fin extensions Post by: NES304 on July 01, 2006, 08:02:51 AM any one have a photo?
Title: Re: rear fin extensions Post by: NES304 on July 15, 2006, 10:56:08 PM still looking (Even in poor condition)
Title: Re: rear fin extensions Post by: SRVLIVES on July 16, 2006, 01:49:56 AM hey nes,
You're after extensions?... or photos? :) I have a pair that I won't now be using, will get some snaps over the next couple days. Title: Re: rear fin extensions Post by: NES304 on July 18, 2006, 05:00:09 AM both but prefer to buy them
Title: Re: rear fin extensions Post by: NES304 on July 24, 2006, 08:31:44 AM just for clarification, what I am after is the piece that runs from the rear boot fins to the rear 1/4 glass (fin extension) So if anyone has any laying about....
Title: Re: rear fin extensions Post by: NES304 on July 26, 2006, 04:31:07 AM or a photo of one so I can maybe copy the profile and knock up my own...
Title: Re: rear fin extensions Post by: Glenn 'Stinky' Stankevicius on July 26, 2006, 05:17:59 AM Do you mean this bit, from the top of the taillight across the top of the quarter panel?
(http://i7.tinypic.com/20z4jr6.jpg) Title: Re: rear fin extensions Post by: NES304 on July 26, 2006, 06:16:24 AM not the actual fin itself but the bit that runs on after the top boot fin has finished to the rear 1/4 glass as seen on in the very right upper corner of the photo..
do you have a pair? Title: Re: rear fin extensions Post by: mcl1959 on July 26, 2006, 07:13:16 AM Nes, I have a pair of the extensions you need (I didn't reply earlier because I thought you may get some closer to where you are). The tag where it is screwed in behind the door rubber is damaged on both of them but the stainless itself is good and straight. I want $20 for the pair plus freight from Victoria (probably about $5)
Regards Ken Title: Re: rear fin extensions Post by: ACE on July 26, 2006, 07:57:43 AM Nes, You may also need the correct rear fins to accomodate the fin extensions. The correct fins have a bit machined at the tip and the extensions slide over the top of them ;)
Regards ACE 8) Title: Re: rear fin extensions Post by: COL58FE on July 26, 2006, 08:24:33 AM G'day,
These are more commonly found on 59 model FC'S,might be a thought when hunting another set down for someone else next time. ;) Col. Title: Re: rear fin extensions Post by: NES304 on July 27, 2006, 12:18:34 AM thanks col, ace and mcl for help.....
ace, can the pair I have be cut in a way to accomodate or simply place the extension over the top? mcl, sent you a pm Title: Re: rear fin extensions Post by: craiga on July 27, 2006, 01:08:11 AM Nes,
I have modified 58 type fins to accept late 59 extensions without any problems. Just measure and use a small file to make the 'adjustments'. It only needs a little taken off. I have a set of rechromed late 59 fins if you get stuck. Let me know via P.M if you need them and I'll send you a price and picture. Cheers, Craig. Title: Re: rear fin extensions Post by: NES304 on July 27, 2006, 10:08:27 PM hey thanks craig
good to know people are looked out for on this forum now wheres that dam file Title: Re: rear fin extensions Post by: NES304 on August 13, 2006, 04:36:11 AM I now have a set.
|