|
Title: fender marker fitting Post by: 59er on January 16, 2006, 08:11:48 AM Hi All, Just a quickie>>>Can someone tell me how to fit some fender markers. They are the red plastic bullet shaped ones. It appears that you have to drill a hole in the lip of the wheel arch so the bolt goes through. Many thanks Kev. ::) ::) :P
Title: Re: fender marker fitting Post by: mcl1959 on January 16, 2006, 11:29:46 AM No No - there should be a small metal square shaped thingy which is tightened by the bolt and this allows the guard lip to be clamped between it and the fender marker braket.
Ken Title: Re: fender marker fitting Post by: 59er on January 17, 2006, 08:43:24 AM Thanks very much Ken.I'll have a go. It seemed very tight, but i'll try again. Kev
|