|
Title: LH torana rack and pinion Post by: Liam Moloney on June 25, 2002, 07:25:51 AM Hi
I have a LH torana rack and pinion steering rack and im wondering what is involved in converting to rear mounted rack and pinion. Ive been told that the shafts are the right length but how do i go about converting my steering shaft and how do i secure it to my crossmember. What else is involved Thanx Liam Title: Re: LH torana rack and pinion Post by: mcl1959 on June 25, 2002, 10:57:51 AM This is not a job for the ametuer as proper steering priciples MUST be maintained in order to keep the steering geometry correct. Unless you understand Bump steer and the Ackerman principle, I suggest you buy a kit from someone such as Rod Hadfield or the like.
Ken |