FE-FC Holden Discussion Forum

Can anyone please tell me if a set of Alloys that fit a Torana will fit an FC ( with HR front / rear ) ???

I have come across a NEW set of Dragway Indy's that have never been out of the box.   The guy boought them for his Torana, but ended up changing his mind re: the car and sold the Torana in favour of a different car, but kept the Dragways.  

So after a quick phone call to the local tyre mob, I found out that Dragway Indy's ( 14" ) are around $420 each....OUCH !     So I'm hoping this guys wheels will fit my FC and I can get them for a good deal.

Any thoughts on fitment ...Torana to HR / FC ???

Cheers

Mark

I'm pretty sure the bolt pattern is the same, not sure about the offset though.  8)

J

Bolt pattern is the same for torana, you will need to find out the offsets of the mags and do some measuring or call Dragway direct.

Mark,
I have dragway pro's 15" with a FC rear end and a HR front end.

To the best of my knowledge (which is not much) the Indy's and Pro's are similar, so I don't think you should have any problems with them.

Cheers
Tim

Most Dragways are a two-piece design also, which means that they can be reset to suit the car. I'd check with a local wheel repairer on price though.

I had a similar problem with ex Torry Dragway 5 spoke on the wagon. Don't know about the Indy's but the 5 spoke couldn't be reset according to the local wheel works.
Torana wheels have a different offset  due to a shorter diff. If the rims are any wider than 6 inch they won't fit under the rear guards without mods
cheers,
Leigh.

Hi Mark
I have a set of dragways 14x6 stud pattern is the same but I had to use spacer plates to clear calipers and I also used longer studs was not happy with this so change the wheels.
cheers Ray :)

For whats its worth, I have a set of Indy's on my FC Ute "Doris" ,HR front end etc, with the current tyres, they rub a wee bit on the wheel arches, but that's because its so low I guess. They are great looking wheels and shine up real well.
Grah.

 Here is a set of indy'sn my girl she has a HR front and rear end i'm pretty sure that they will fit LC and LG torries as well\
sorry about the dirty car but i live on a dirt road and since i got her registered i have been cruising everywhere
                                        Cheers Rusty

the front, oh and i am getting her lowered soon (she looks like she is doing a permanent wheelstand)

Don't know if you can still get them, but accessories for these mags (and the Centerline Champs) are a three winged knock-off cap that look pretty good IMHO.

Rusty,
           That height should not be allowed mate, it needs to be dropped about 5 inches..................

i know Tayz (i need a step ladder to get into it) wont be long and she will be as low as fehotrods
                           Cheers Rusty

 Well here ya go Tayz , here is the first part done , dropped 2 inches at the front, will let her settle, probably it will drop another ten mill, then do the back
                        Cheers Rusty

Settled! ;D

Ha thanks Stinky lol
                                        Rusty

G'DAY RUSTY,
                   LOOK'S LIKE YA COULD DO
WITH SOME NASCO MUD FLAP'S IN THE
FIRST COUPLE OF PIC'S  ;D.
SORRY GOT NONE. ;)
LOOK'S BETTER NOW.
                                         CHEER'S COL.