|
Title: Aussie 4spd rear mount Post by: Woodzy on April 27, 2005, 10:31:42 PM hi fellas,
I am installing a red 186 and an aussie 4spd into an FC sedan. Have cut part of the hump out and am looking at how one should support the rear gearbox mount. The simplest and dearest way would be to fit a hadfields chassis kit, but these are only required for V8's and V6's. I am SURE I saw an pic of a fabricated mount made of blux box section in here somewhere, but i cannot find it anywheres. If anyone can help with info or ideas on fab'ing up a new mount, it would be muchly appreciated. Title: Re: Aussie 4spd rear mount Post by: customFC on April 28, 2005, 09:48:16 AM Hey woodzy
You can get a bolt in mount from Dellows here in Sydney. Bolts through the floor w/ reinforcing plates. Regards Alex Title: Re: Aussie 4spd rear mount Post by: Woodzy on April 28, 2005, 10:19:11 AM Alex,
Fantastic mate, thanks heaps, i think i found what i need. www.dellowauto.com.au cheers Woodzy |