|
Title: HR sway bar, EJ/EH column Post by: NO NAME on April 24, 2005, 10:06:45 AM I have decided to use a EH column instead of fb, besides the FB one was cracked, if you ever buy a column from a swap meet make sure you check it for cracks around the gear shift hole at the bottom, it seems pretty common.
does any one have a good EJ/EH column and wheel, or at least the horn bar and buttons to sell. also a HR sway bar. Title: Re: HR sway bar, EJ/EH column Post by: Sarge on April 28, 2005, 07:16:28 PM Leon
I have a HR front sway bar and a good EK Steering Column. The only thing is I am in Palm Beach QLD. I only Just swaped the EH steering column last week. Cheers Sarge Title: Re: HR sway bar, EJ/EH column Post by: FC229 on April 29, 2005, 09:17:11 AM I looked into changing columns when I put rack and pinion in my wagon. The hk t g column is collapsible, so much safer, though the bolts don't quite line up if you're using the steering box. I think you have to drill 1 hole and add a spacer. You can apparently adapt a Toyota Crown Power steering box to the column. I ended up putting a commodore column in, so I can't say how the ktg one will look.
The idea of the collapsible column appealed to me, and I figure if you're doing a conversion, it's worth the extra work...... I spose that doesn't help with the parts your chasing though!! Title: Re: HR sway bar, EJ/EH column Post by: tmudie on April 29, 2005, 10:10:05 AM I've got a good EH auto column, not bad wheel and horn ring etc, and a real good HK premier column and wheel also auto. Both good, was going to try to make a combined unit out of it, but never got around to it. give me a cal if you want to come look. in sydney, northshore
Tony 0402 891 337 Title: Re: HR sway bar, EJ/EH column Post by: Fast_Eddie on May 02, 2005, 07:05:06 AM Leon,
I don't think the HR sway bar is the correct one. I understand the FB/EK one fits if you are using a HR front end in a FC. The technical section of the NSW club site details the conversion. Regards Edward Title: Re: HR sway bar, EJ/EH column Post by: NO NAME on May 02, 2005, 08:50:12 AM I am looking for the sway bar that dips down in the centre to clear my bottom pulley.
I know I will have to cut out and box the snout to take it. |