|
Title: Alloy Rocker Cover Post by: nigelb42 on March 22, 2005, 10:21:00 AM Hi all,
I picked up a finned alloy rocker cover at a swap meet on Sunday, it has the word 'Lanspeed' cast into the top. Is this an FC accessory or for an earlier or later grey motor? The other finned alloy cover I have has no writing whatsoever on it. thanks Nige Title: Re: Alloy Rocker Cover Post by: 4hammers on March 22, 2005, 10:34:08 AM Hi Nige.
Not an Nasco accessory, but an aftermarket accessory. There WAS one alloy cover that was Nasco, but it was plain & had Nasco stamped into the rear end.There were heaps of different kinds of covers made, usually they had matching manifolds, sometimes sideplates & headers. A few types were: WEY, Speco, Lanspeed, LYN, Kleinig, just to name a few. There were also some plain ones who I do not really know who produced. I have a shiny "Speco" Cover, with a "Speco" triple downdraught Strommie set up, "Speco" headers & am looking for (I am beginning to think in vain), "Speco" alloy sideplate. But at this stage, I will be putting a polished Lanspeed cover on with my Norman. Looks better & seems to suit the Norman. If the headers fit well, the will go on as well. Regards, Rob J Title: Re: Alloy Rocker Cover Post by: 2brite on March 23, 2005, 11:57:59 AM ummmmm please excuse the drooling :o
I would love to see a photo of this set up Rob cheers Nunzio Title: Re: Alloy Rocker Cover Post by: 4hammers on March 23, 2005, 12:10:51 PM Which one, Nunzio?
I'd have to put the Speco set up together, but the Norman & Lanspeed, with the Headers is already done. I will try & borrow my nephews digital camera again. Rob J Title: Re: Alloy Rocker Cover Post by: Burnsy on March 23, 2005, 12:33:13 PM Don't worry about the borrowing the camera, it will probably be easier if you just ship the whole lot over to me and I will take pictures of it fitted to a shiny green EK and and post them on the forum for you ;)
I too would like to see photo's of the Lanspeed cover fitted. |