FE-FC Holden Discussion Forum

General => General Board => Topic started by: REDMR2RED on February 18, 2005, 02:03:38 AM



Title: Do EH Brake Drums fit an FC?
Post by: REDMR2RED on February 18, 2005, 02:03:38 AM
I was told by R & E Auto parts in Dandenong VIC that EH brake drums are the same a FE - FC brake drums.

Can someone confirm that please.

At $88 each has anyone got a cheaper solution.  My drums are almost at minimum thickness, rather than pay for one machining I thought new drums might be the way to go.

Kevin


Title: Re: Do EH Brake Drums fit an FC?
Post by: craiga on February 18, 2005, 03:40:01 AM

Kevin,

FWIK The EH drums are wider than the standard FE FC type. You could fit them but would need to change to EH brake internals.

Cheers,

Craig.


Title: Re: Do EH Brake Drums fit an FC?
Post by: REDMR2RED on February 18, 2005, 08:03:21 AM
Thanks Craig, that answers that.

As it happened the FC drums I don't think have ever been machined and with only slight wear the turned up nicely.  Saved me $88 per corner.

The rears are now done, new wheel cylinders, new shoes, new axel bearing and oil seal.  Came up a treat.

I'll tackle the fronts tomorrow.

Kev


Title: Re: Do EH Brake Drums fit an FC?
Post by: stevefcvan on February 18, 2005, 09:03:51 AM
      i just wondering are fb/ek drums the same as fe/fc as when i got my ute 5 years ago it did not have the outer drums and some internails on my ute when i got it so i picked up a set of fb/ek drums. are thay about the same?      how much do you think new slave cylinders and machining the drums would be worth? ase i think i should make a start on it as soon as my vans fineshed.


Title: Re: Do EH Brake Drums fit an FC?
Post by: REDMR2RED on February 18, 2005, 09:16:20 AM
The new brake wheel cylinders were $65 each, all the new brake shoes were $39 x 2 (no change over, so I still have the old ones) for front and rear, and machining I did myself at a mates workshop.

Kev


Title: Re: Do EH Brake Drums fit an FC?
Post by: ChrisB on February 18, 2005, 10:38:49 AM
Kevin,
I have an old mechanic mate who use to own a brake shop, and he wanted to upgrade mine to EH, apparently the are wider than FC and you have to mount up complete from backing plate.

They use to do this mod to there race cars and it was the best result they got in that era


Cheers ChrisB  8)


Title: Re: Do EH Brake Drums fit an FC?
Post by: RET on February 18, 2005, 12:08:20 PM
Quote
     i just wondering are fb/ek drums the same as fe/fc [clipped].


FB/EK are slightly wider than FE/FC

cheers
RET