|
Title: Installing VH40 Booster Post by: Dave_EH on February 04, 2005, 10:42:44 AM G'day,
I've finally finished my brake upgrade and have bolted in my new VH40 booster, however as the car previously ran unassisted brakes I'm not exactly sure which line goes where in the booster. I've taken out the lines to make templates to take down to the brake shop, so i need to know which way to bend the line: The booster is on the drivers side guard with the pointy end facing the driver. Which is the inlet and which is the outlet in the booster? The pointy end facing the diver or the other one on the side? And what is the process for bleeding the system? I notice the booster has a bleeder also. Regards Dave Title: Re: Installing VH40 Booster Post by: RET on February 04, 2005, 10:36:31 PM Dave,
I have something I can send you that will answer all your questions - will your email choke on a 1.5MB attachment? If you don't receive it let me know and we can work out some other method. cheers RET Title: Re: Installing VH40 Booster Post by: Dave_EH on February 05, 2005, 01:55:50 AM Hi Ret,
Have recieved the instructions! Much appreciated Dave |