FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: FE_UTE on January 29, 2002, 12:41:11 PM



Title: FE Radio and Windscreen rubbers
Post by: FE_UTE on January 29, 2002, 12:41:11 PM
I have just aquired some spares for my ute.One item is a radio .It is a manual vibrator type with the dials on the side centered to the dial face.The only number that I can find is RM 1578. Can anyone tell me if this suites an FE or FC
Also I have 2 Windscreen rubbers Rare spares 7413385 and one from MTS Quality products Melbourne with the number 413384 on the plastic bag. Do these fit FE or FC and which models.    


Title: Re: FE Radio and Windscreen rubbers
Post by: ACE on January 30, 2002, 03:18:14 AM
 ;) HEY FE UTE
   7413385 FE/FC SPECIAL FRONT SCREEN RUBBER
    7413384FE/FC SPECIAL REAR SCREEN RUBBER
   MY FE RADIO HAS NUMBER RM11493
   HOPE THIS HELPS REGARDS ACE


Title: Re: FE Radio and Windscreen rubbers
Post by: FE_UTE on January 30, 2002, 12:33:51 PM
Thanks ACE ,at least the radio seems to suit the ute


Title: Re: FE Radio and Windscreen rubbers
Post by: mcl1959 on February 04, 2002, 11:58:56 AM
I assume the face of the radio u have fits into the panel space below the speaker grille,  does the radio have a black plastic face with a small "air chief" badge at the top? If so it is genuine FE.  If it has a chrome face with either HMV or Astor words it is aftermarket to suit FE and FC

Regards  Ken


Title: Re: FE Radio and Windscreen rubbers
Post by: FE_UTE on February 04, 2002, 12:31:45 PM
Thanks Ken....
The radio has the badge and plastic face
I have just finished installing it and the red power light comes on but have still to connect to the speaker that is in my ute that had a picnic radio cradle and arial in it but no radio.The arial connection is different so I will have to modify it.