FE-FC Holden Discussion Forum

Galleries => Other Images => Topic started by: customFC on September 06, 2004, 10:19:04 AM



Title: 2 tone or 3 tone
Post by: customFC on September 06, 2004, 10:19:04 AM
Here's an old pic showing an FE with the rear quater painted out. This seems a fairly popular thing to do back then. Strange that you don't see it much today. I think most would have painted this area to match the roof, but you could introduce a 3rd colour if you wanted.
(http://image.sl.nsw.gov.au/gpo2/21/d2_21475.jpg)
Pic taken in the SW of NSW.
Regards
Alex


Title: Re: 2 tone or 3 tone
Post by: zulu on September 06, 2004, 01:17:11 PM
Nice pic Alex, We have one of those paint jobs down in the shed.
Regards, Gary


Title: Re: 2 tone or 3 tone
Post by: Martin on September 07, 2004, 12:20:03 AM
... and Gary's has got the third colour introduced - grey, white, and that red/brown stripe.


Title: Re: 2 tone or 3 tone
Post by: HAD 708 on September 07, 2004, 01:02:21 AM
Alex
That color combo pattern was quite popular in the FE range in particular as the colors were not as two tone and distinctive as in the FC. In the Holden tune up manual of Keith Winser's late 1957 on page 100 there is a wide range of alternatves to what is shown in the picture.
thanks
Brett