|
Title: Rack and Pinion , Disc Brake front to suit FE/FC Post by: slim on September 04, 2004, 09:20:10 AM I have a HR crossmember complete for sale . It comes converted to 14 inch Hz disc and calipers. And with Rack and Pinion steering.It also has the engine mounts for Holden Red motor.Fantastic condition ,,,,,,,,CHEAP, $400... CALL SLIM 0401303998......
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: earlyholdenfan on September 04, 2004, 09:22:27 AM Hi Slim, front or rear nmounted rack??
and how much for the ute? hehe Cheers Matt Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: slim on September 04, 2004, 09:30:21 AM Front mounted Rack... ..... And I have another ute , With Hr disc brake front, , Needs restoration $1500.... But the 1 with the Rack in its Not for sale.
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: Sarge on September 06, 2004, 06:43:00 AM Slim
With the rack & pinion steering what steering coloum do you use, and do you have too fit the chassis kit. I have never fitted one of these kits nor have I seen one. I am just trying to picture it. May-be tomorrow before I start talking to old Jack No 7. ;) Cheers Sarge Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: slim on September 10, 2004, 11:55:49 PM You have stumped me , But Im assuming Torana, Commodore , HR, , HT, ht Hk... The chassis kit has been SOLD ,,, So its just the HR crossmember assembly as described above thats left for sale.... $400, Already converted to 14 inch HZ disc with Rack and pinion.
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: FC-V8 on September 11, 2004, 01:49:01 AM Sarge
Which steering column depends on where you want the ignition. torana on the column or if you want to retain it in the original position you could install a HK column. But it has to be a collapsible type column to meet rego. Glenn Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: slim on September 11, 2004, 03:24:53 AM I also have 2 of these Collapsable HK.Ht HG, columns . 1 is a manual column , The other is an Auto column . $75 each, Includes steering wheel, Blinkers etc etc.... If someone wants the Hr crossmember with rack and a Collapsable Column I will make it $450.
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: Sarge on September 21, 2004, 08:38:52 AM Glenn Thanks for your reply.
Slim I am thinking, Also if I was to fit a red motor what sump would I need. Cheers Sarge Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: oldgmh on September 21, 2004, 09:40:51 AM You need an EH sump and oil pick up to fit a red motor into an FE/EK with a HR crossmember.
Some others may fit, but EH is best. Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: Sarge on September 21, 2004, 06:08:54 PM Earlee
Eh sump is right if it's standard steering rear mount, but with this crossmember being front mounted rack and pinion could I use any other model EG: a HR sump. Cheers Sarge Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: slim on September 24, 2004, 07:15:00 PM I have to shift this Crossmember So I have dropped the price to Sell . $300 and out she goes.. Sydney Pickup only. Also has 2 Hz front wheels that go with it. Ring Slim 0401303998
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: blacky on September 25, 2004, 08:55:44 PM slim, I am interested in your front end ,but I think the freight will kill me , will see what I can arrange. Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: nicko on September 26, 2004, 12:20:11 AM with freight on big items interstate you can often get the heavy transport truck company's to deliver depot to depot by getting one of the small pine pallets and wrapping them with heavy plastic to seal water out ,as long as they can fork it on you would be surprized just how cheap it is.i sent a Ford Boss 302 two years ago from Hervey Bay (country QLD) over to Perth depot for $380 and it weighed heaps more than a front end
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: Sarge on October 09, 2004, 06:46:53 PM Nicko
Glad to hear your exporting Ford crap out of here.lol Slim Sorry I think the trouble and cost of getting it up here is not worth the trouble. Will keep looking up this end of the world, as I am in no real hurry at this point. Still got Hilda to finish before I can even get My Wagon in the shed. Cheers Sarge Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: slim on October 19, 2004, 09:47:54 AM This Hr crossmember is still available, :o :o
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: blacky on October 19, 2004, 08:59:17 PM I am still interested slim , just trying to find oout how to get it over here,should know more in the next two weeks or so.
Title: Re: Rack and Pinion , Disc Brake front to suit FE/ Post by: blacky on October 19, 2004, 08:59:55 PM I am still interested slim , just trying to find out how to get it over here,should know more in the next two weeks or so.
|