FE-FC Holden Discussion Forum

For Sale and Wanted => Parts Wanted => Topic started by: Emu on July 03, 2004, 12:50:31 AM



Title: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 03, 2004, 12:50:31 AM
Hi All,

Hilda's cancer treatment is in full swing! Sarge has jumped on board and has rekindled his welding skills. Car is progressing slowly but steadily.  :)

Exploratory Surgery has revealed severe invasive rust in the bottom of the passenger side A pillar. So..... what Sarge needs is the bottom of the A pillar and inner and outer sills going back about six inches. I think the whole bit could be cut out of a donor vehicle in one piece.

Anyone handy with an angle grinder with an FC (Wagon) shell in the backyard? ???

I'm not sure if the wagon bit is an issue.

Emu - Bird praying for help.


Title: Re: Sills and A Pillar for "Hilda"
Post by: craiga on July 03, 2004, 03:53:40 AM
Hi Emu,

"A" pillar on wagon and sedan surely will be the same. If you can't get a good second hand one Rares sell inner and outer sills, and I just made the lower part of the pillar (where it bolts to the front subframe) using cardboard templates as a guide and a few swear words. Turned out OK in the end and looks fairly close to factory.

Good Luck,

Craig.


Title: Re: Sills and A Pillar for "Hilda"
Post by: Emu on July 03, 2004, 04:06:35 AM
Thanks Craig,

Yeah.. that's the fall back position.

Here's a pic of the bit I need for any who may have a shell lying around. The other side is salvagable apparently but this side is gooooooorrrne!

EMU

(http://photo.starblvd.net/Emu_FC/2-5-5-1091627707?m=1&pg=1&ro=4&co=4)

I need from just above the hinge in picture to just right of the last rust spot.


Title: Re: Sills and A Pillar for "Hilda"
Post by: Emu on July 03, 2004, 04:12:36 AM
here's another pic

(http://photo.starblvd.net/Emu_FC/3-1-1-1091630924?m=1&pg=2&ro=0&co=0)


Title: Re: Sills and A Pillar for "Hilda"
Post by: Phantom on July 03, 2004, 04:14:52 AM
oooooooooooooh it dont look good Emu
                           Rusty


Title: Re: Sills and A Pillar for "Hilda"
Post by: Emu on July 03, 2004, 04:16:45 AM
and finally.............

This shot shows the extent of the disease!  :'

((http://photo.starblvd.net/Emu_FC/3-1-2-1091631575?m=1&pg=2&ro=0&co=1)


Title: Re: Sills and A Pillar for "Hilda"
Post by: -KIWI- on July 03, 2004, 05:07:26 AM
hang on emu ill just go and get the gun and put hilda outa her misery !!!!!!!! >:( >:( >:(
whos the bird in the pic fine feathers !!!!!!!!! :P :P :P


Title: Re: Sills and A Pillar for "Hilda"
Post by: -KIWI- on July 03, 2004, 05:19:12 AM
kiwi with gun


Title: Re: Sills and A Pillar for "Hilda"
Post by: Emu on July 03, 2004, 05:59:32 AM
That's my 16 year old daughter who you have already insulted terribly you sick Kiwi!!   >:( >:(

Stick to sheep!

Emu - angry bird!


Title: Re: Sills and A Pillar for "Hilda"
Post by: Emu on July 03, 2004, 06:01:16 AM
Sorry Kiwi,

Not really angry. Had ya going for a sec tho eh?

Easy mistake to make.

Can I borrow the Shotgun to keep the 16 year old boys away!!

Emu - Father of Sarah


Title: Re: Sills and A Pillar for "Hilda"
Post by: fe2ek on July 03, 2004, 06:18:50 AM
Hi Matt.If you need a passenger sill,send me a PM,I have a Nos one.

Cheers Geoff


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 03, 2004, 08:12:24 AM
And this is the Kiwi who just asked today if he could stay at our place for a couple of days in August!! :o

U r welcome dude but u betta sleep with one eye open. I don't think that the things Sarah has planned r physically possible but it should be amusing to watch!

Emu - Bird bemused at the stupidity of the Kiwi.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 03, 2004, 08:16:13 AM
Kiwi,

sarah says remove the photo or stay is off. serious!!


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 03, 2004, 08:25:24 AM
due to death treats and promise of serious physical pain i have removed offening picture sorry miss emuling !!!!!!!!!


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Phantom on July 03, 2004, 08:35:22 AM
A death treat ? You said it Kiwi , not us
                        Rusty


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 03, 2004, 08:37:51 AM
He was panicking Rus,

He had posted a modified pic of Sarah which had appeared before and caused some grief. I thought he'd learnt.

Emu


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Sarge on July 03, 2004, 09:44:07 AM
Enough Dribble,  find me that part.

Regards
Sleepless Sarge


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 03, 2004, 10:19:42 AM
Oy,

What r u doing posting at 9.45 pm Sarge? I thought u'd be working on Hilda!

I sent a pm to geoff. Looks like we might be able to get sills. the rest seems a prob. We'll see what response we get.

Get some sleep!

Emu


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Glenn 'Stinky' Stankevicius on July 03, 2004, 12:04:40 PM
If you get stuck, give me a yell and I will see what I have between the two sedan shells out the back.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 04, 2004, 06:00:01 AM
sarge stop postin and start workin
this is yer final warning


kiwi boss of emus restoration projects >:( >:( >:( >:(


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 05, 2004, 06:15:02 AM
Hey Stinky,

Its Sunday night and all I have from this post is a bunch of "Kiwi Dribble".

I was hoping to keep Sarge moving on "Hilda".

If you were able to find a section in reasonable condition to satisfy the request, I'm sure I could compensate you accordingly!

Whaddyathink?

Emu


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 05, 2004, 06:17:09 AM
thats it plucka no more presents 4 ewe >:( >:( >:( >:(



kiwi -not a drivilling bird  :( :( :( :'( :'( :'( :'(


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 05, 2004, 06:34:12 AM
That's "Dribble" Kiwi,

The Salivary stuff that comes out of ya mouth. Actually...... yer right...... its brown!

Can ya work that one out!!!

Emu - discusser of bodily secretions



Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 05, 2004, 07:21:49 AM
ewe  bad bad bird thats it gloves are off ya overgrown chicken bird >:( >:( >:(



kiwi- not a dribbiler or driviller :'( :'( :'(


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 05, 2004, 07:24:14 AM
Looking for an "A" Pillar section guys.

Never lose sight of that fact!!!!!!

Ignore the Kiwi


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 05, 2004, 07:27:37 AM
ewe makin the lil brown bird GRUMPY !!!!!!!!!!!


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Sarge on July 05, 2004, 07:52:18 PM
Hey Glen
   If you can help out here Please do so. So we can stop this childish behavior from these two & get on with the job at hand.

Regards
Sarge (old mature, non-dribbling & alround good guy)

P.S
     Emu dont panic yet today, new cowl vent then little holiday then new A pillar & sill (hopefully) then little bit of paint few nuts & bolts coulpe seats bit of glass & presto Hilda Is Alive  8)


P.S.S
      Kiwi Shhhhhhh or come August you will be sleeping on very cold Emu floor, :-X

P.S.S.S
     Oh to all other Forum user DONT FORGET "A" PILLAR & SILL WANTED

Thank you, that will be all.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 05, 2004, 08:15:39 PM
Well said Sarge,


A Pillar section!!!!

Emu -  Bird almost panicking


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Glenn 'Stinky' Stankevicius on July 05, 2004, 11:59:18 PM
Here's some pics, let me know if it's OK, a bit rusty but more salvagable than what's already there, I think.
If you want it, let me know when. Bus Freight should get it up there for a reasonable price.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Glenn 'Stinky' Stankevicius on July 06, 2004, 12:00:16 AM
Shot 2


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Glenn 'Stinky' Stankevicius on July 06, 2004, 12:02:20 AM
And the last, better let me know how much you want cut-out too.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 06, 2004, 07:23:13 AM
What do ya think Sarge?

Looks way better than what we have I think.  ???


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 06, 2004, 08:15:48 AM
Hey Stinky,

Thanks heaps for the photos. I think ur right, it does look a hell of a lot more salvagable than "Hilda's"

Just waiting for Sarge to long on and have a look. I have sent him a text message asking him to jump on and check out the pics. Shouldn't be too long.

Thanks again

Emu


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Fast_Eddie on July 06, 2004, 09:20:47 AM
Emu,

Without wanting to be critical, if you blasted the ones Stinky has, they will end up looking pretty close to your own.

The section isn't that hard to fabricate, as it does not have to look exactly as per original to function.

The other problem is that even the most rust free cars I've seen, like my wagon, still need work in that section, so the liklehood of finding one to cut up in a short time frame may be unlikely.

Is it possible to remove a guard off "Harvey" use for templates of the area?

Just ideas, but I've repaired the section myself, taking it piece by piece, with a high degree of success, and I am a rank amateur when it comes to welding!

(Today A pillar repairs, tomorrow the world!)

Regards

Edward



Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 06, 2004, 08:14:45 PM
Ed,

Its a very good point u make. After talking with Sarge, "We Concur". I'm going to grab an outer sill and he'll make up the inner and "A" pillar bit.
He's a   legend with the welding and we were just trying to save a bit of time. What u said about even the best section requiring "some" work is true.

Stinky,
Thanks heaps for the offer. Your a legend too!

I'll post the pics of the progress under "Hilda's Extreme Makover"

Emu


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:13:40 AM
as kiwi is a helpful bird i hope these pics help these are of my lhf a pillar as it was repaired


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:14:45 AM
close up shot


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:16:14 AM
another view


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:17:27 AM
lh a pillar


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:18:43 AM
frt floor and a pillar all fresh new steel


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:20:04 AM
rh side a pillar sill assb after being welded closed


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:21:02 AM
and another of rh pillar


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:22:09 AM
underside view lh floor a pillar /sill


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:26:43 AM
frt subframe and floor underside shot


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 12:28:38 AM
and this stuff is awsome
RIPO
from alltex coatings think they have a branch in queens land $ 16 a litre
it works !!!!!!!!!!


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Martin on July 12, 2004, 02:18:42 AM
Web address for Altex Coartins for addresses of their branches and distirbutors:

www.altexcoatings.com.au

Had to put this up so that I get out of the "Newbie" category.

Martin


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Martin on July 12, 2004, 02:37:30 AM
 >:( Great typing, Martin  >:(

for Altex Coartins read "Altex Coatings"


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: robbzfc58 on July 12, 2004, 02:46:45 AM
kiwi   bout time ewe got started on the fc >:( ;)
ewe should have started a thread on your car so we can watch the progress ::)      its lookin good 8)
martin congrats on making it to junior status..we can now let you in on a secret...in top right of YOUR posting ,you'll see you have the option to remove or modify your message ;) 8)
    cheers trev


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 12, 2004, 07:53:55 AM
About time you posted something useful here Kiwi.

Sarge will be perusing these photos closely I'm sure, but not for too long I hope.

I have accepted your challenge and am confident "Hilda" will be dressed way before "Sarah"
Bring it on Bumble-Bird.

Emu - restorer with sarge on his side.


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 06:02:39 PM
emu the rules state:
under section 11.2
subsection 3.98.019
paragraph 13.76/11/76
states quite clearly that :
if a tradesperson or person who thinks he is a qualifyed welder or NOT shall divide his time EQUALLY and WITHOUT favor  between both combatants so that no 1 flightless bird has a advantage this also applies to mechanics /painters/ uposterers etc


please dont try to flought the rules again mr emu


kiwi -rule following extreme makeover combatant.....


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 12, 2004, 06:37:32 PM
Please refer to the subsequent paragraph in subsection 3.98.019 (B):

"Notwithstanding hitherto aforementioned subsections -

It is a requirement in all international competitions covered by these statutes, that all tradespeople involved in restorations MUST BE OF THE NATIONALITY OF THE ENTRANT."

Let me translate for ya Kiwi.

YA CAN'T HAVE HIM!!!!!!!!!

Find a Kiwi that can weld.

Emu - Bird that abides by the rules. All the rules.



Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Emu on July 12, 2004, 06:38:59 PM
P.S.

What's an "Uposterer"?


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: Sarge on July 12, 2004, 06:39:15 PM
Kiwi
     What the?
     Rules Please explain what this means. As I am only a poor old Dumb Ex-Soldier. I dont understand, I just do as I am told by my superiors. Which is Defend my country and protect all my countrymen, from short ass big nose little flightless birds that think they can do anything faster or better than us Aussie.  ;)


Regards
Sarge

P.S
     You will need to do more than name a car after my leader's daughter. As now now I have to defend both Emu & the Happiness of Miss Sarah. :)

P.S.S  
      So in Kiwi terms this all mean section 11.2. Well that page is missing from my book.
                          Let the games begin. ;D


Title: Re: Sills and "A" Pillar for "Hilda"
Post by: -KIWI- on July 12, 2004, 11:13:34 PM
if thats the case emu and sarge ill have your mechanic and panelbeater then as in your defintion of your version of the rules they are both kiwis as admitted by emu himself
that also means i can use streetneat dosnt it !!!!!!!!


kiwi-bird without his head in the sand !!!!!!!!!!!!!