|
Title: Torana Suspended FC Post by: Spinner on July 01, 2004, 11:35:15 AM Probably been talked about before...
Any ideas or experience in fitting a UC Torana front crossmember & suspension to an FE/FC? I thought it might be a good idea because you get RTS (Mk II) and Rack & Pinion Steering. Fitting the trailing arm rear and might be a tad difficult though. Spinner Title: torana front under FC. Post by: Ed on July 01, 2004, 09:09:57 PM Ive seen a Torana front under Ahmet the Mad Turks HD ute.
the bolt holes dont align properly with the subframe, and i reckon it looks bodgey (big plates and bolts), Ahmet reckons its fine, and the ute goes hard so...??? I cant shed any light on the angle the x member sits and subsequent effects on castor angles etc. the trailing arm rear wouldn't be too hard to apapt, but I would scratch build a 4 bar for less stuffing about. Cheers Ed Title: Re: Torana Suspended FC Post by: nicko on July 04, 2004, 02:04:46 AM i have just seen some photo's of EH sedan with Torana LH front end and they cut crossmember in half and widened it by 2 inches by welding in steel plates
|