|
Title: fc steering box parts wanted Post by: -KIWI- on December 11, 2003, 07:55:52 AM after fc stg box nut that hold s the pitman arm on and the pitman arm itself prefrablly nos
cheers kiwi Title: Re: fc steering box parts wanted Post by: Emu on December 11, 2003, 09:26:20 AM Got the whole shooting match in my donor car.
It was NOS (In 1959) - Maybe NNS - otherwise its still in good nick. What did ya use to remove the pitman arm? Have ya got any suggestions for your old Emu mate about how to remove the pitman arm without a pitman arm puller? Emu - Puller of Pitmen Title: Re: fc steering box parts wanted Post by: mcl1959 on December 11, 2003, 10:51:16 AM best way to remove the pitman arm without a puller is with a crow bar. Turn the wheel all the way to the right and give a sharp tap with the crow bar. The weight of the bar will be more than enough to knock the arm off unless some dork has done it up really tight.
Ken Title: Re: fc steering box parts wanted Post by: Emu on December 11, 2003, 07:40:51 PM Hey Ken,
Assuming some dork has done it up tight, and some other dork - who has a long neck and feathers - has removed everything from the steering column, including the wheel, what would u suggest? Title: Re: fc steering box parts wanted Post by: -KIWI- on December 12, 2003, 02:58:40 AM i suggest u be nice to the kiwi and he will send u his pitman arm (emu leg) pullar
Title: Re: fc steering box parts wanted Post by: Emu on December 12, 2003, 04:36:03 AM R u interested in my near new pitman arm nut and pitman arm?
I'm very interested in borrowing your puller. Maybe you could send it by that high speed freight company that u use! "Kiwi Air" or whatever it is. Will IM Emu |