|
Title: Wheel Track Post by: jezz on October 14, 2003, 08:27:32 AM I'm in the process of writing to the establishment to get their stamp of approval for my planned modifications.
Trouble is my FE service manual doesn't list the original wheel track front & rear, and since the car wasn't stock when I got it I can't confirm that it's unchanged from original and can't simply measure the current setup. Any help would be appreciated. Jezz Title: Re: Wheel Track Post by: Effie C on October 14, 2003, 09:56:47 AM Jezz
Front Tread 54.5" Rear Tread 54.5" Length(Over Bumpers) 176" Width (Maximum) 66 7/8" Height (5 Passenger Load) 60 15/16" Turning Circle 36.5' Minimum running ground clearance measured at centre of rear axle housing (5 Passenger load) 7 21/64" This is straight out of FE FC Holden Shop Manual, you will more then likely have to convert from feet and inch's for the new age goverment employees. ::) Good Luck John M Title: Re: Wheel Track Post by: jezz on October 15, 2003, 04:16:29 AM thanks heaps...
|