FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: sgo on September 06, 2003, 07:49:44 AM



Title: Ride/Springs
Post by: sgo on September 06, 2003, 07:49:44 AM
I wonder if anyone has had any experience with ute or wagon rear springs fitted to their sedan and what effect that may have had on the ride?
better/worse, harder/softer, etc.?
Thanks,SGO.


Title: Re: Ride/Springs
Post by: colt on September 07, 2003, 04:34:02 AM
sgo,
I have ute rear springs fitted to my sedan. I have stock HR front springs and find that the front is too soft for the ute springs . I had 6.5 inch mags on the car & need the ute springs to combat tyre scrape on the standard guards. I am returning to 6inch wheels & may be getting my standard springs reset . I find the ute springs do give a bouncy ride & would need heavy duty front springs to handle properly.
Colin


Title: Re: Ride/Springs
Post by: mcl1959 on September 07, 2003, 04:42:55 AM
Wagon springs are the go.  These have 5 leaves (utes and vans have 6 whilst sedans only had 4).  I have the wagon springs on my sedan and they stiffen it up a bit without going overboard.  They do raise the rear about an inch I guess in stock form but you could have them reset to suit your needs.

Ken