|
Title: fe ute id Post by: kalfe on September 04, 2003, 10:41:10 PM hi all
im looking for the id number inside the engine bay i have been told its near the battery box or regulater ive looked around that area but cant find it can anybody tell me actually where it is maybe im going blind heheh ;D Title: Re: fe ute id Post by: ACE on September 04, 2003, 11:09:16 PM Hi kalfe,
Have a look at the upper R.H fender skirt. (Opposite side to where you are looking). Regards ACE 8) Title: Re: fe ute id Post by: colt on September 05, 2003, 09:11:24 AM kalfe,
Sometimes they seem to be really lightly stamped, making them hard to find. Many coats of paint in the engine bay can make them hard to find also. Colin Title: Re: fe ute id Post by: RET on September 05, 2003, 10:09:59 AM FE chassis numbers are usually on the passenger's side, in the area you mentioned. They are often stamped on the convex curved surface of the inner guard, which can make them very hard to find. Especially as the numbers are only about 3/8" tall, unlike the FC and later ones that are closer to an inch high. Feel along that curved edge for them, and try rubbing some talc on them if you can't read them (this doesn't work on india ivory inner guards ;))
I've got two FEs, one from Sydney and one from Melbourne. The Sydney car has the numbers back near where the regulator used to be, but the Melbourne car has them about the middle of the battery box. In both cases they're on that curve I mentioned. Hope that helps. RET |