|
Title: Front drives break line Post by: Wookie 66 on November 15, 2020, 01:05:33 PM Hi all help
Im having a mental block can’t find my deconstruction photos Any one have a picture of the front drivers break line there’s something I’m missing Have the brass block with the passenger side connected and master cylinder connected and rear Leaving the front drivers side no where to go? Cheers Title: Re: Front drives break line Post by: ardiesse on November 15, 2020, 01:28:04 PM Trevor,
The brake line distribution block has four holes for brake pipes: one in the top (master cylinder), one at the rear (for the rear brakes), and two holes at the front: left and right front brake pipes. Have you got the right one? It has a tab and bolt hole on the right side to mount on the front subframe RH outer leg. The distribution block for the rear axle only has three holes, and no mounting tab. Rob Title: Re: Front drives break line Post by: ardiesse on November 15, 2020, 04:12:29 PM Seen from the front:
(https://i.imgur.com/pS8C32Y.jpg) Seen from the rear: (https://i.imgur.com/n0dM7RU.jpg) Rob Title: Re: Front drives break line Post by: Wookie 66 on November 16, 2020, 06:45:47 AM Hi Rob
Well that’s just embarrassing I put in on upside down Thanks for the photo Cheers Title: Re: Front drives break line Post by: my8thholden on November 16, 2020, 08:04:55 AM The bloke that hasn't made a mistake ,hasn't made anything ...Vern
|