|
Title: Under body Post by: DnD on May 22, 2020, 04:25:24 PM I am cleaning under the body and guards what is used for paint or body paint.
Title: Re: Under body Post by: mcl1959 on May 22, 2020, 05:01:53 PM Depends if you are wanting factory original or the best finish
Ken Title: Re: Under body Post by: KFH on May 23, 2020, 09:40:13 AM I used POR. Some people use KBS a similar product
Title: Re: Under body Post by: Errol62 on May 23, 2020, 03:41:21 PM Used a product called Metalfix 100. Water based phosphoric acid rust converting primer, which sets very strong, is heat resistant to 1000C, impermeable, and can be painted over with most any paint if required. Needs surface rust to bond to, which saved me a lot of work. Brush application. Painted my engine bay, firewall and inner guards etc with it. Painted over with high build and satin acrylic and looks great.(https://uploads.tapatalk-cdn.com/20200523/05957df0ca555d1f480b52c83bf43737.jpg)
(https://uploads.tapatalk-cdn.com/20200523/cc6284abe293bbb18b9b90a47e0296c0.jpg) The second photo is the straight metalfix, which is how I’m leaving the underside. It has dust and overspray but just a matte black when finished. There is also a red lead colour which is cheaper but not as heat resistant. Sent from my iPad using Tapatalk Title: Re: Under body Post by: my8thholden on May 24, 2020, 07:31:23 PM we used KBS , three step application ,only time will tell,its only been on 18mths or so while other things were done ..Vern
|