|
Title: bolts or screws ??? Post by: my8thholden on May 10, 2020, 08:09:55 AM Hi folks ..I have misplaced the pack , will turn up when I have found others , murphys law ,with the means of mounting the bonnet release plate to the apron ,is the plate that the pull cable goes to on the panel in front of radiator held on with 4 bolts or screws into the 4 captive UNF nuts ..Dave Bolton says his are slotted dome headed screws ,but not 100% sure that is original ,a definite confirmation of what was original on FC225 Special sedan would be appreciated ..Vern .
Title: Re: bolts or screws ??? Post by: ardiesse on May 10, 2020, 08:57:02 AM Vern,
Round-head Phillips screws, 1/4-28 x 1/2", with lock washer, according to the masterparts cattledog. Rob Title: Re: bolts or screws ??? Post by: my8thholden on May 10, 2020, 09:25:30 AM Thanks Rob ..Actually Dave did say Phillips Head ..That confirms that ..Gees I am getting bad ...I will have to put some bolts till I find the correct ones ..
|