FE-FC Holden Discussion Forum

Technical Board => Modification Help => Topic started by: the59fnc on July 07, 2019, 08:02:23 PM



Title: Fc/ eh wagon exhausts...
Post by: the59fnc on July 07, 2019, 08:02:23 PM
Hey guys, I did a bit of research and I don't like my chances but I am putting a 186 in my fc wagon and sooner or later will need an exhaust. Long story short there's extractors and a full system off a eh wagon for sale and I was curious if it would even go close to fitting?

Thanks


Title: Re: Fc/ eh wagon exhausts...
Post by: ardiesse on July 07, 2019, 08:41:04 PM
A full EH exhaust system won't fit an FC, because the underbodies of both are shaped differently.  Plus, for styling reasons, the EH exhaust comes out on the driver's side; whereas on the FC, it comes out on the passenger's side.

Red motor extractors can't cope with the presence of the transmission mounts on a grey gearbox; but if you are using a red-motor gearbox with the single rear mount, you might just be able to use EH extractors in the FC.

Rob


Title: Re: Fc/ eh wagon exhausts...
Post by: the59fnc on July 07, 2019, 08:54:41 PM
Thanks for the quick reply.. I'm running a celica 5spd.. I didn't think it would fit was just wishful thinking 😁


Title: Re: Fc/ eh wagon exhausts...
Post by: weddo on July 23, 2019, 11:00:37 PM
I just pulled of a compete exhaust from my wagon, 186 (standard exhaust manifold) and Celica 5 speed.

regards
Weddo