FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: Glenn 'Stinky' Stankevicius on April 06, 2019, 07:59:37 PM



Title: Clean Vinyl?
Post by: Glenn 'Stinky' Stankevicius on April 06, 2019, 07:59:37 PM
Ever wonder if that vinyl was worth saving or not?

Variable speed drill Drill, $1:50 round hand scrubbing brush, nut, bolt and a bottle of Jif.

(http://i63.tinypic.com/z4har.jpg)

Link to brush
https://www.bunnings.com.au/morgan-palm-dish-brush-with-soap-dispenser_p4480485

The best part about this is that the brush has a pump action, disconnect the top, pull out the valve and I found a bolt that went straight in with no drilling, put a washer and nut on then tap the clear plastic a few times to break it off.
Just use low speed and go slow otherwise there will be grey Jif everywhere. I suggest hosing off if you can as a sponge and bucket of water take forever.