FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: my8thholden on March 04, 2019, 07:49:13 AM



Title: wind lacing
Post by: my8thholden on March 04, 2019, 07:49:13 AM
Gents  ..for FC Special Sedan …{ one thing I should have noted }
How much wind lacing do I order for whole car { black fabric outer with the silver thread }

In NSW ..what is the measurement on outside of the B pillar under the rain gutter to drill for seat belt barrel bolt ...THX


Title: Re: wind lacing
Post by: Glenn 'Stinky' Stankevicius on March 04, 2019, 09:34:48 AM
I sell windlace for a Sedan allowing 2 metres per door, there is a little left over. Keep in mind too that factory fitted windlace stops/starts at the B pillar i.e. there is gap across the B pillar.