|
Title: window regulator fitting Post by: surferboy on February 10, 2018, 04:25:51 PM it seemed so simple.
(https://uploads.tapatalk-cdn.com/20180210/b21fe99372d2aea3a4c77efbecb0a463.jpg) Sent from my GT-I9505 using Tapatalk Title: Re: window regulator fitting Post by: ekute on February 10, 2018, 04:41:38 PM it seemed so simple. And the result is.....(https://uploads.tapatalk-cdn.com/20180210/b21fe99372d2aea3a4c77efbecb0a463.jpg) Sent from my GT-I9505 using Tapatalk Sent from my iPhone using Tapatalk Title: Re: window regulator fitting Post by: JOX515 on February 10, 2018, 05:17:39 PM You doing it upside down surferboy ;D, turn it up the right way and go step 1,2,3, etc.... unstead of ....3,2,1
Title: Re: Re: window regulator fitting Post by: surferboy on February 10, 2018, 11:28:24 PM You doing it upside down surferboy ;D, turn it up the right way and go step 1,2,3, etc.... unstead of ....3,2,1 i post pics as well as i fix cars 😞the instructions don't mention this screw !(https://uploads.tapatalk-cdn.com/20180210/f702dabe2be6386429af8a8287ea4f0d.jpg)(https://uploads.tapatalk-cdn.com/20180210/2824280d4102ca5fe451cdab2679b9ba.jpg) Sent from my GT-I9505 using Tapatalk Title: Re: Re: Re: window regulator fitting Post by: surferboy on February 10, 2018, 11:36:29 PM i post pics as well as i fix cars 😞 the toothy coggy bit got jammed somehow by this screw. the instructions don't mention this screw !(https://uploads.tapatalk-cdn.com/20180210/f702dabe2be6386429af8a8287ea4f0d.jpg)(https://uploads.tapatalk-cdn.com/20180210/2824280d4102ca5fe451cdab2679b9ba.jpg) Sent from my GT-I9505 using Tapatalk i took skin off my hand wrestling the bits through the opening this is why i pay other people to do things. i did eventually get it all apart AND i seem to have got it all back together 😎😎😎 ps i posted this just to remember how to use tapatalk ready for my Nats Diary posts begin Sent from my GT-I9505 using Tapatalk Title: Re: window regulator fitting Post by: mcl1959 on February 11, 2018, 01:38:25 PM I agree, the manual is a bit brief here. When I do this job I usually remove that nut so the channel can be flexed in a bit. I lower the glass to the bottom of the door and then remove it from the channel. Once the glass is out of the channel then the channel can be flexed away from the regulator to make it easier to get it the regulator out.
Ken Title: Re: Re: window regulator fitting Post by: surferboy on February 12, 2018, 12:14:18 AM I agree, the manual is a bit brief here. When I do this job I usually remove that nut so the channel can be flexed in a bit. I lower the glass to the bottom of the door and then remove it from the channel. Once the glass is out of the channel then the channel can be flexed away from the regulator to make it easier to get it the regulator out. i later noticed that it gets mentioned in the next chapter for removing the glass. Ken i should have read that first 😯(https://uploads.tapatalk-cdn.com/20180211/c695b30d94e850acf78375f8fc87aa65.jpg) Sent from my GT-I9505 using Tapatalk |