FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: DJ on November 28, 2017, 11:37:31 PM



Title: Seeking advice on Gearbox parts
Post by: DJ on November 28, 2017, 11:37:31 PM
I have a couple of incomplete Wibroc overhaul kits.
From the components listed in the Crash Gearbox Enthusiasts Guide I have a couple of questions:
Q1. Where am I likely to find - Synchro cone retaining rings (two off) & Counter shaft and reverse gear thrust washers (two off)?,
Q2. Is the RS Seal Oil Gear Box Selector 48 FJ FE FC FB EK Part# 7403035 the replacement for Selector shaft seal (NAK Australia part number E062.100.25)?


Title: Re: Seeking advice on Gearbox parts
Post by: Harv on November 29, 2017, 07:17:25 AM
I have a couple of incomplete Wibroc overhaul kits.
From the components listed in the Crash Gearbox Enthusiasts Guide I have a couple of questions:
Q1. Where am I likely to find - Synchro cone retaining rings (two off) & Counter shaft and reverse gear thrust washers (two off)?,
The snap ring is generally only obtained by raiding a wrecked gearbox. I may have one if you are stuck, but am on the road for work for the next fortnight.

Q2. Is the RS Seal Oil Gear Box Selector 48 FJ FE FC FB EK Part# 7403035 the replacement for Selector shaft seal (NAK Australia part number E062.100.25)?
Yes, same item.

Cheers,
Harv


Title: Re: Seeking advice on Gearbox parts
Post by: DJ on November 29, 2017, 10:14:23 AM
Thanks Harv.
The gear box is still in the car, so assuming the snap ring is intact it seems I should be able to reuse it.
With the Rare Spares seal I think I've made up a full kit.