|
Title: Engine bay brake line Post by: walks on November 10, 2017, 07:51:44 PM G'day all,
I after photos of the routing of the steel brake line in the engine bay. The one that goes from the 4 way connector to the Lh flexible line. cheers Walks. Title: Re: Engine bay brake line Post by: ardiesse on November 10, 2017, 09:47:53 PM As far as I can remember - up the subframe leg and all the way around the subframe, just under the flange: driver's side, then the front tie member, then the passenger's side to the brake hose bracket. I think there are even supposed to be spring clips holding the brake pipe to the front subframe tie member under the radiator.
Rob Title: Re: Engine bay brake line Post by: zulu on November 11, 2017, 06:28:41 AM There are at least 2 tabs punched from the subframe tie member which bend over the line to hold it in place
Title: Re: Engine bay brake line Post by: mcl1959 on November 11, 2017, 11:22:03 AM This is it. Right round the subframe.
(https://s17.postimg.org/jzjrx702j/image.jpg) ($2) Ken Title: Re: Engine bay brake line Post by: Maco on November 11, 2017, 02:52:29 PM Hi Ken,
Is that brake line for sale? Cheers, John Title: Re: Engine bay brake line Post by: mcl1959 on November 12, 2017, 12:04:46 PM Yes it is John, but would be very difficult to post to NSW.
What are your thoughts? Ken Title: Re: Engine bay brake line Post by: Maco on November 12, 2017, 08:08:37 PM Hi Ken,
Maybe someone can take the Nationals for me. John Title: Re: Engine bay brake line Post by: mcl1959 on November 12, 2017, 08:42:25 PM I can do that for you
Ken |