|
Title: Measurements needed Post by: FCRB26 on March 30, 2017, 07:20:42 AM Hi All
IS anyone near a grey motor rocker cover breather can they measure the cork gasket in mm please ? (roughlly 35 ID and 60 OD with my eyecrometers) I have a sheet of 3mm cork going into the machine this morning and was going to cut a heap. Any other cork gaskets i can do a run in the future (https://uploads.tapatalk-cdn.com/20170329/8f24a30ebf9aa12cb857adaca39bebb6.jpg) Title: Re: Measurements needed Post by: Maco on March 30, 2017, 09:16:24 AM Hi All IS anyone near a grey motor rocker cover breather can they measure the cork gasket in mm please ? (roughlly 35 ID and 60 OD with my eyecrometers) I have a sheet of 3mm cork going into the machine this morning and was going to cut a heap. Any other cork gaskets i can do a run in the future (https://uploads.tapatalk-cdn.com/20170329/8f24a30ebf9aa12cb857adaca39bebb6.jpg) Hi Pete, Just measured mine 39 X 58. (your not to bad with the eyecrometer!!) Cheers John PS: Can I please take a couple, PM me the costs, thanks. Title: Re: Measurements needed Post by: FCRB26 on March 30, 2017, 10:28:28 AM Hi Pete, Just measured mine 39 X 58. (your not to bad with the eyecrometer!!) Cheers John PS: Can I please take a couple, PM me the costs, thanks. I will cut some more tomorrow (https://uploads.tapatalk-cdn.com/20170329/960e91057127ba87750600bfb38f6629.jpg) Title: Re: Measurements needed Post by: FCRB26 on March 30, 2017, 04:19:04 PM Fits perfect thanks again John.
(https://uploads.tapatalk-cdn.com/20170330/c73c30cd9e8e1b42fc10e0e6f72a4f6a.jpg) (https://uploads.tapatalk-cdn.com/20170330/b30955afdca494ecbdd41663e9eca29a.jpg) Say 10 each delivered to cover a satchel and postage 5 bucks extra for more than 1. John ill shoot a pair off for taking the time to measure it up. Sent from my SM-G920I using Tapatalk Title: Re: Measurements needed Post by: Maco on March 30, 2017, 10:18:00 PM Hi Pete,
It is very much appreciated, but think I should pay you for your time, material & postage. Cheers John Title: Re: Measurements needed Post by: julius on March 31, 2017, 12:58:52 PM Hi Pete, would I be able to have 6 cork gaskets please. Would you please call me on 0407486759 so I we can get details.
Thank you. Kind regards Julius Title: Re: Measurements needed Post by: Ken's 57 on April 06, 2017, 10:21:57 AM Hi Pete - any chance I could grab 2 please?
PM sent. Cheers, Ken |