FE-FC Holden Discussion Forum

I am after the fasteners or similar that will do the job to hold the internal front door trim chrome strips to the trim boards (left & right hand sides). They are also used on the front seat plastic type trim left & right sides. ie: on the doors the pin head slots into the chrome strip and can be moved to align with the holes in the board, the tail piece goes through the board then bends over to hold the strip in place. Rare Spares don't have them.
Also after a FE grill insect screen before the next Nationals.

JohnBM

Pete, FCRB26 has these as reproductions. I used a set for my seat trims and they work a treat.
Regards, Jim

Today is your lucky day John

I have the clips and i also happen to have a good insect screen which i think is FE i will post a pic tonight.

(https://uploads.tapatalk-cdn.com/20170305/aa4cb9bdbefe575d7cbcc21cd231956a.jpg)

Pete

Thanks Chaps,

Am very interested, and will want them if you can get back to me via my email johnandbette17@gmail.com to make arrangements. If the grill screen is definitely for an FE not the FC one I will get that from you as well.

JohnBM

(https://uploads.tapatalk-cdn.com/20170310/b8c3448d98c214fca95c02f2db248f05.jpg)

Unsure which model
I assume fc looking at the lower section.

Sent from my SM-G920I using Tapatalk

Am just getting an opinion as to which car this will fit from another club member and get back to you sometime later today.

Pete, Just had it confirmed that it is for an FE, please get back to me on the price for both that and the fasteners, plus postage and method of payment.

Thanks for that
JohnBM

Not a problem John.
Sorry for the delay we have a lot on at work.

How many trim clips would u like ?

Thanks for getting back - I'll take 3 dozen clips. Could you please get back to me regarding price of both the clips & the screen on our personal email.

JohnBM