|
Title: Springs Post by: Gordon on January 23, 2017, 04:18:21 PM Hi When fitting a Holden V8 into an FC using a HR frontend with stubtech 2 in drop axles ,what springs do I need ? ,Heavy Duty, Standard height or lowered ?
Thanks Gordon Title: Re: Springs Post by: mcl1959 on January 23, 2017, 04:45:31 PM I had the same setup with a red six and used the standard HR springs. In my opinion the front was quite low enough without adding lowered springs. With a V8 I would use heavy duty springs stock height.
Ken Title: Re: Springs Post by: NES304 on January 23, 2017, 05:47:00 PM I had the same setup with a red six and used the standard HR springs. In my opinion the front was quite low enough without adding lowered springs. With a V8 I would use heavy duty springs stock height. X2Ken Sent from my iPhone using Tapatalk Title: Re: Springs Post by: Gordon on January 23, 2017, 06:13:29 PM Thanks that's what I thought, just wanted to be sure before I bought some
Gordon |