FE-FC Holden Discussion Forum

Technical Board => General Technical => Topic started by: GMHwagoon on October 09, 2016, 03:30:59 PM



Title: mag wheel options
Post by: GMHwagoon on October 09, 2016, 03:30:59 PM
 
 On my fc wagon l am running hr fronted with torana disc brakes  , rear end is hr
 looking at mag wheels either dragway or jellybean .(as l like the old school look )
 
 my question is what options do l have in wheel size,  can l look for wheels in the 14in range
 there seems to be more wheels available in 14in, do l have to change anything

    thanks fcwagoon
 


Title: Re: mag wheel options
Post by: mcl1959 on October 09, 2016, 06:00:15 PM
Very tough, old school look plus Torans brakes not very compatible. The old school mags are deep dish whilst Torana brakes push the track out.
In the 60s and early 70s the front brakes were stock allowing deep dish wheels, plus suspension was not lowered like today. Have a look at pictures of Alan Hale's FC.
You can use 14 inch wheels but they are more likely to foul on the guards.
On the rear you would be better using a Torana rear end to narrow the track.
Flared guards in the late 70s were the obvious solution, but they are also taboo now.

Ken



Title: Re: mag wheel options
Post by: FCRB26 on October 09, 2016, 07:08:50 PM
I went 15x7 these are new as i could not find tasmans in good nic.
Hr discs
Lj rear


(http://uploads.tapatalk-cdn.com/20161009/7cd7978766aaf0e427baa0c7e722a1df.jpg)

Sent from my SM-G920I using Tapatalk