FE-FC Holden Discussion Forum

Technical Board => Restoration Help => Topic started by: freddyc on December 09, 2015, 09:57:17 PM



Title: bumper rubbers
Post by: freddyc on December 09, 2015, 09:57:17 PM
does rares make the rubbers that go between the body and the bumpers???
fred


Title: Re: bumper rubbers
Post by: customFC on December 09, 2015, 11:47:32 PM
John does.
Check out his thread in repro parts.
http://forum.fefcholden.club/index.php?topic=16530.0 ($2)
Regards
Alex


Title: Re: bumper rubbers
Post by: freddyc on December 10, 2015, 03:35:05 PM
alex I have these ones the ones I am looking for are the ones that go on the bumper bolt, sorry for the confusion>
fred


Title: Re: bumper rubbers
Post by: GMHwagoon on December 10, 2015, 05:55:34 PM


  go down to bunnings buy the black rubber door stops drill them out  there you go


Title: Re: bumper rubbers
Post by: zulu on December 10, 2015, 09:28:03 PM

As mentioned, the black rubber door stops may do the job, but if you want closer to original Speeds have these

 http://www.speedspares.net/SK1004_p/sk1004.htm

Rare Spares? are now doing the special retaining bolts which often go missing
I was lucky enough to still have mine as they are a bit exy

http://www.ebay.com.au/itm/NEW-UTE-VAN-REAR-BUMPER-BAR-RUBBER-STOP-BOLTS-FOR-FE-FC-FB-EK-EJ-EH-HD-HR-HOLDEN-/161149958137


Title: Re: bumper rubbers
Post by: DJ on December 10, 2015, 10:08:44 PM
'Speeds' is the Rare Spares outlet in Canberra. Laurence is good to deal with. Same RS part numbers & prices.
The bolts on the other link sure are exy.


Title: Re: bumper rubbers
Post by: mcl1959 on December 11, 2015, 05:20:41 PM
I thought Fred was talking about the rubber spacers which go on the corners of the bumpers to get the "bumper to body" gap right
Ken


Title: Re: bumper rubbers
Post by: freddyc on December 12, 2015, 11:36:02 AM
yes that is the ones ken, maybe I should do my research better and get the right name for them.
fred