|
Title: FE Ignition Switch Problem Post by: JohnBM on November 12, 2015, 12:01:06 AM Recently purchased a replacement, for my original FE ignition switch, and found packaging identification not compatible with car and it has cost a considerable sum of money extra, to install by a licensed Auto Electrician. Has any one else experienced any problems with incompatible components/packaging.
Title: Re: FE Ignition Switch Problem Post by: surferboy on November 12, 2015, 01:19:12 PM G'day John
My new accelerator pedal has a different "angle of the dangle" to the one I removed not sure if the new one is correct angle and/or my old one was wrong for some reason but I need to jig things around to get the replacement one to fit The door hinge pins I got for my damaged hinge were labelled FE-FC rear but they fit both front and rear doors I will pass this on to Todd at Rares in Welshpool 8) 8) 8) Title: Re: Re: FE Ignition Switch Problem Post by: mickrat on November 15, 2015, 08:45:28 AM Recently purchased a replacement, for my original FE ignition switch, and found packaging identification not compatible with car and it has cost a considerable sum of money extra, to install by a licensed Auto Electrician. Has any one else experienced any problems with incompatible components/packaging. As an auto electrician myself I can tell you that it is not expensive to install and modify wiring to suit replacement switch I think you got ripped off !! Mickrat tassy Sent from my SM-T315T using Tapatalk Title: Re: FE Ignition Switch Problem Post by: JohnBM on November 15, 2015, 07:51:38 PM The pack I purchased was incorrectly labelled, and didn't include the correct components - although it stated it was for an FE. This is still ongoing, will keep you informed. Will be happy if it gets me to Toowoomba and back.
|