|
Title: Window regulator rollers Post by: BrendanC on July 16, 2003, 02:29:21 AM Does anyone know if you can still get the rollers that are riveted to the ends of the window regulator arms? They roll in the chanel at the bottom of the window glass as the windows are wound up and down.
Mine are worn through to the shaft on a couple and the others are seized. Any help much appreciated. Thanks, Brendan. Title: Re: Window regulator rollers Post by: fastjbav6 on July 16, 2003, 04:23:32 AM hi Brendan
i remember about 5 years ago or more u could still buy the rollers 4 HQ 2 HZ, i read this in Street Machine Magazine. D'ont think their the same size but u could always adapt the roller guide off the HQ 2 HZ 2 the FE/FC,failing that the rollers on some shower screens might be easily adapted. See your local hardware shop 4 rollers 2 suit OLDER sliding windows. U could always do a cut and shut on the lifting arms by fitting latter model ones with the same roller guides 2 suit. Title: Re: Window regulator rollers Post by: mcl1959 on July 16, 2003, 10:09:37 AM Why not just chuck out the stuffed winders and replace with good ones - I have good winders with working rollers.
Ken |